职位空缺

Jr. DFT Engineer         

Job Summary: 

A Jr. DFT Engineer assists on the Design, Verification, integration and Physical implementation of different Design For Testability techniques for mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Contributes to the design, development, & verification of digital / mixed-signal IC’s. 
• RTL Digital Design using Verilog and/or SystemVerilog
• Behavioral modeling, and Digital Verification using standard DV languages (SystemVerilog, UVM).
• Synthesis and DFT
• Development and Review of Synthesis/P&R SDC and DFT Constraints.

• Gate-Level simulations
• DFT Implementation and Metrics Analysis.

• Close interaction with the Design, Verification, Physical Design and mixed-Signal Teams

Qualifications: 

• Bachelor/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• Has the ability to follow instructions/tasks according to design specifications/procedures.
• Basic knowledge of ASIC development process and digital design techniques. 
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge of standard DV languages (SystemVerilog, UVM) and behavioral/RTL coding. 
• Executing tasks that hit project milestone. 
• Knowledge/Experience with the following is a plus: 
• SCAN and Other DFT Techniques.
• Knowledge of power management industry/applications.
• I2C, I3C, SPI, USB, PMBUS.
• Scripting and automation languages like TCL, Python and C/C++. 

Location: 

Barcelona, Spain   

Job Summary:

A Jr. CAD Engineer works in the design and development of tools and scripts, automation of tasks, definition and implementation of new standard development flows and methodologies, configuration and maintenance of industry standard EDA tools for digital/mixed-signal ICs design for leading edge technologies, among other tasks. Products include switching regulators, display drivers, audio amplifiers, precision linear circuits and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

If you have a solid software background and interest in supporting semiconductor chip design, this is the job for you.

Essential Functions:

• Installation, maintenance and support of ASIC Mixed-Signal Design Tools (Analog Design, Analog Layout, Digital Design, Digital Verification, Digital Physical Design, Mixed-Signal Design, Mixed-Signal Verification, MCU Software Development Kits, etc.). 
• License installation, monitoring and management. 
• Research and analysis of new Methodologies, Flows, Tools, IP Vendors, and Licenses.
• Assist on R&D Tasks related to Digital Design, Verification, DFT, Physical Design, etc.
• Define and implement new standard flows and methodologies. 
• ASIC Design Flow stages and tasks scripting and automation. 
• Development of a continuous integration plus continuous delivery environment applied to IC design.
• Define and implement new standard flows and methodologies to enhance and automate IC design tasks 
• Linux system administration, e.g. network and server installation and management.
• Data synchronization and backup among different servers.
• Build a standard environment and scripts for CAD tools.
• Troubleshoot problems related to machine, network and CAD tools.
• Develop scripts to improve CAD tools usage and administration. 
• Document processes and flows.

Qualifications:

• Proficiency in Unix/Linux admin and networking
• Proficiency in scripting languages (Tcl, Perl, Python, csh, etc.) and OOP.
• Familiar with revision control tools (Git, SVN, ICManage, etc.)
• Excellent verbal, written communication and interpersonal skills.
• Experience in system administration and supporting/installation of CAD tools.
• BSEE/BSCS or equivalent (MSEE/MSCS preferred)
• DevOps knowledge and experience (CI, CD, pipelines, Jenkins, GitlabCI, etc)
• Basic Digital Design and Verilog/SystemVerilog knowledge is a Plus.

Location:

Barcelona, Spain

Jr. Mixed-Signal Design Engineer         

Job Summary: 

A Jr. Mixed-Signal Design Engineer assists on the Analog Design and Analog-Digital interface definition, design, validation, verification and integration of mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Assist with the creation of Mixed-Signal Verification environments
• Write Mixed-Signal testcases and assertions/checkers.
• Analyze and debug test results, code coverage and functional coverage. 
• Assist with Mixed-Signal Test Plan and Modelling Plan generation based on design requirements and product datasheets of digital / mixed-signal IC’s.
• Analog-Digital Interface Definition and Documentation.
• Behavioral Modelling of Analog Blocks. Analysis to verify architectural choices and trade-offs
• Analog and Digital Mixed-Signal Validation, Verification, simulations and debugging. 
• Close interaction with Senior Digital Design, Digital Verification and Analog Design Engineers to develop System Level and Behavioral Models.
• Automation and scripting.

Qualifications: 

• Bachelor/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• Has the ability to follow instructions/tasks according to design specifications/procedures.
• Basic knowledge of ASIC development process and digital design techniques. 
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge of standard DV languages (SystemVerilog, UVM) and behavioral/RTL coding. 
• Executing tasks that hit project milestone. 
• Knowledge/Experience with the following is a plus: 
• SCAN and Other DFT Techniques.
• Knowledge of power management industry/applications.
• I2C, I3C, SPI, USB, PMBUS.
• Scripting and automation languages like TCL, Python and C/C++. 

Location: 

Barcelona, Spain   

Who we are

We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.

What we do

We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications.

Who we look for

A Layout Engineer Intern to assist in the physical implementation of integrated analog circuits utilizing leading edge technologies with industry standard IC design tools. Products to be implemented may include power management, sensors, signal processing and data converters.

Task:

• Area estimation.
• Block-level floor-planning.
• Block-level routing.
• Layout verification (DRC, LVS, ANT, ERC).
• Layout reviews.
• Post-layout modifications and debug based on analog designer’s feedback.
• Import, integrate and verify integrity of digital design physical blocks.
• Work in close interaction with Senior Layout Engineering and Analog Design Engineering.

Qualifications:

• Bachelor/MS in Electrical Engineering with emphasis in analog/layout microelectronics. 
• Has the ability to follow instructions/tasks according to design specifications/procedures.
• Basic knowledge of ASIC fabrication process and technology components.
• Good written/verbal communication skills and strong teamwork/collaboration. 
• Knowledge/experience using Cadence analog/layout tools is a plus.

Reports to: Local Site Design Manager

Job Summary:

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators, linear regulators, high-voltage circuits and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

Essential Functions:

• Participate in the entire product development cycle, from product definition through product release.
• Work on the full design process from system level down to transistor level, including verification and layout supervision.
• Assist ATE development with Design-For-Test methods.
• Oversee and mentor junior designers.

Required Skills and Qualifications:

• BSEE / MSEE with 5+ years of industrial experience in Analog circuit design.
• Effective communication and written skills in English are a must.
• Show initiative to communicate with different departments as needed to resolve issues.
• Understand power conversion architectures and its control methods such as buck and boost.
• Experience in the design of switching regulators and power stages up to 60V and 15A.
• Understand analog and mixed signal circuits including amplifiers, bandgaps, linear regulators, data converters, etc.
• Understand analog layout techniques.

Location: Barcelona, Spain

Job Summary: 

A Senior Digital Verification Engineer will define and lead the development of the Digital Verification framework and infrastructure of complex digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• UVM and System Verilog based Digital Verification environment definition and development.
• VIPs standardization, definition, development and documentation.
• Define VIP’s integration into the Project’s Digital Verification environment.
• Digital Verification Metrics definition for RTL and Gate-Level Verification.
• Test Plan definition and development.
• Digital Verification Automation and Scripting.
• Regression’s infrastructure definition, development and management.
• Close interaction with Senior Digital and Analog Designers to develop VIP models.
• Lead the Digital Verification Team.
• Lead and Supervise Digital Verification Tasks of multiple projects.
• Review Digital Verification Metrics and Results of multiple projects.
• Define and design Digital Verification Top-Level Tests.
• Analyze and debug test results, code coverage and functional coverage. 
• Digital Verification estimation, planning and scheduling to meet tape-out dates.

Qualifications: 

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 5+ years of strong experience in both RTL and Gate-Level Verification.
• Proficient in Digital Verification Industry Languages (UVM, System Verilog) and Standards.

• Proficient Level in DV skills and areas: Constraint random tests, SV assertions, coverage metrics, analog and digital DV modelling, DV test plans, regression analysis and reports, UVM DV Agents (Monitor, Driver, Scoreboard), etc.  

• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Excellent scripting and automation skills using TCL, Python or C/C++.
• Leadership skills to technically guide the DV Team and mentor Jr. DV Designers.
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge/Experience with the following is a plus: 
• Embedded designs and/or firmware development
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• GITLab 

Location:

Lisbon or Porto, Portugal

Sr. Digital Design Engineer                                                                                                          

Job Summary:

Sr. Digital Design Engineer assists in the development, design, and verification of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include, power management, signal management and mixed signal functions. 

Essential Functions:

• Contributes to the design, development, & verification of digital / mixed-signal IC’s
• Works closely under the supervision of Senior members of IC Design team
• Works closely with system engineer for IC’s top behavior define 
• Good written/verbal communication skills and strong team work/collaboration
• Digital Design and Digital verification/testcases using standard RTL/DV languages (Verilog, SysVerilog, UVM)
• Knowledge & Use of industry standard Asic tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc
• Understand the test flow for digital or mixed-signal IC’s
• Good English verbal and written skills.
• Self-motivated, could have strong team work/collaboration with overseas colleges.

Qualifications:

• MSEE / PhD in Electrical Engineering and emphasis digital design/VLSI coursework and projects.
• Has the ability to follow instructions/tasks according to design specifications / procedures
• Understand the basics of IC fabrication.
• Strong knowledge of ASIC development process and digital design techniques.
• Knowledge of standard DV languages (Verilog, SystemVerilog, UVM) and experience in behavioral/RTL coding
• Experience with programming, scripting and automation languages like Perl/Phyton and C/C++
• Executing tasks that hit project milestone
• Knowledge/Experience with the following is plus:
• embedded designs and/or firmware development
• knowledge of power management industry/applications
• I2C, SPI, USB, PMBUS

Location:

Lisbon or Porto, Portugal

Job Summary:

The General Manager of MPS Portugal is a position in Design Engineering. Manages activities for a team of Design Engineers in the development of analog and mixed-signal ICs. Directs and supervises daily activities and annual goals for project and Design team. Provides guidance and direction to subordinates within bounds of Company’s standard design procedures. Also, to oversee the MPS general day to day functions in the Portugal office.  

Essential Functions:

• Responsible for the design and development of integrated circuits.
• Actively manages entire product development cycle, from product definition through product release
• Direct responsibility for managing activities of the Design Engineering team
• Receives assignments from Department Manager and determines how to use resources based on established policies and procedures.
• Participates in hiring evaluations.
• Responsible for recruiting new hires.
• Oversee the MPS general day to day functions in the Portugal office.

Qualifications:

• 5-8+ years of hand-on experience in switch mode power supplies especially in multi-phase core power design.
• MSEE or higher required
• Fluent communication skills in English
• Excellent writing and presentation skills
• Self-motivated
• Previous experience in a power supply manufacturer or power management IC company desired
• Must have prior experience in successfully managing Design Engineers / teams.
• Good written and verbal communication skills

Location:

Lisbon or Porto, Portugal

Position Overview:

Development of analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products include, switching regulators, display drivers, audio amplifiers, precision linear circuits and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

Job Functions:

• Lead Design responsibility for the design and development of integrated circuit products.
• Participates in the entire product development cycle, from product definition through product release.
• Participates in cross functional teams to develop new technologies and markets.
• May work with external vendors/customers in development or support of new product families.

Experience Requirements:

• 12 years of Semiconductor and/or Analog circuit design experience.
• Excellent verbal and written skills.
• Successful track record in bringing products from conception to market release.
• BSEE / MSEE Required

Location:

Lisbon or Porto, Portugal

Job Summary:

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include, switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

Essential Functions:

• Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision
• Participates in the entire product development cycle, from product definition through product release.
• Oversees and mentors development of more junior engineers

Required skills:

• Understand power conversion architectures such as buck, boost and etc
• Understand analog and mixed signal circuits including amplifies, bandgap, data converters and etc
• Understand power converters control schemes as such voltage mode, current mode and etc
• Understand analog layout techniques 

Qualifications:

• BSEE / MSEE with 5 + years of Semiconductor and/or Analog circuit design experience.
• Good verbal and written skills.

Location:

Lisbon or Porto, Portugal

Job Summary:

•            Promote MPS’ products to Key customers in Electric Vehicle (EV)/EV charging  infrastructure market  

•             Have a deep understanding of MPS products, services and be able to advise others about them

•             Identify new business opportunities in this market, including key accounts, their PSAM, their position in the market, growth areas, and strategies to break in

•             Understand the needs of customers and field sales, and be able to respond effectively with a plan of how to meet these. Capable of building solid relationships with field sales team and customers

•             Strategic thinking - seeing the bigger picture and setting aims and objectives in order to develop and improve the business

•             Seek ways of improving the way the business operates, familiar with direct/digital marketing

•             Coordinates new product development for target applications within PL and field sales team. This includes but is not limited to market strategy, new product definition, specification analysis, business case development, profitability analysis, and market pricing

•             Train members of field sales team, manages communication between customers and field Sales to headquarters and engineering teams on new product ideas or market information. Also from Design and Engineering to field resources and customers on new product introductions and marketing updates. Ensure staff are on board throughout the organization, and understand the need for change and what is required of them

Qualifications:

•             BSEE/MSEE with 5+ years of experience in the power management and analog systems experience

•             Working experience in Industrial, Automotive industry is a plus.

•             Experience in EV OBC, traction inverter is a plus.

•             Familiar with direct/digital marketing 

•             Business travel is required.

•             Oral/written proficiency in English

Job Summary:

•            Promote MPS’ products to Key customers in Electric Vehicle (EV)/EV charging  infrastructure market  

•             Have a deep understanding of MPS products, services and be able to advise others about them

•             Identify new business opportunities in this market, including key accounts, their PSAM, their position in the market, growth areas, and strategies to break in

•             Understand the needs of customers and field sales, and be able to respond effectively with a plan of how to meet these. Capable of building solid relationships with field sales team and customers

•             Strategic thinking - seeing the bigger picture and setting aims and objectives in order to develop and improve the business

•             Seek ways of improving the way the business operates, familiar with direct/digital marketing

•             Coordinates new product development for target applications within PL and field sales team. This includes but is not limited to market strategy, new product definition, specification analysis, business case development, profitability analysis, and market pricing

•             Train members of field sales team, manages communication between customers and field Sales to headquarters and engineering teams on new product ideas or market information. Also from Design and Engineering to field resources and customers on new product introductions and marketing updates. Ensure staff are on board throughout the organization, and understand the need for change and what is required of them

Qualifications:

•             BSEE/MSEE with 5+ years of experience in the power management and analog systems experience

•             Working experience in Industrial, Automotive industry is a plus.

•             Experience in EV OBC, traction inverter is a plus.

•             Familiar with direct/digital marketing 

•             Business travel is required.

•             Oral/written proficiency in English

Monolithic Power Systems (MPS) provides power circuits for systems found in cloud computing, telecom infrastructure, automotive, industrial and consumer applications.

 MPS is seeking an energetic, efficient, self-motivated and resourceful team player to be a member of its Finance-Accounting/Administration staff supporting our local office activities in Ettenheim, Germany, as well as for other European subsidiaries.  

Essential Functions:

• Customer service and Accounts receivable: 

- Customer point of contact for services provided by our lab. 

- Handles PO, billing, collection, scheduling and others.

• Accounts Payable: Invoice registry, approval and payment tracking, 
• Reporting to regional HQ - JE preparation, reconciliation and audit supports.
• Facility Admin Support: Coordination with vendors and service providers.

PO, delivery, etc. 

• Supports Health and Security plan, implementation and document maintenance.
• Supports ESG reporting.
• Support for ad hoc projects as assigned.

QUALIFICATIONS:

• BS/BA degree in accounting, administration or related field
• 1-3 years’ experience 
• Intermediate knowledge of Excel. 
• Fluent in German, English and Spanish (C1) (Other EU language is a +)
• Excellent verbal and written communication skills. 
• Excellent analytical and organization skills. 

MPS ships billions of products a year that are used in everything from consumer electronics and IoT (Internet of Things) to laptops and cars. We are designing products for electrical vehicles, robots, large battery packs, data centers, automotive and industrial applications with memory-based programmable plug-and-play products. We are looking for an engineer for our sensor division who will work on the latest generations of our angular position and 3D magnetic sensors.

The person will work in MPS Switzerland offices in Tolochenaz with a small, dynamic group. The work will include very diverse engineering tasks with the opportunity to learn new core competencies such as mechanical CAD design.

Responsibilities

• Work with our engineering team to design and build setups for characterizing sensor products (angle, 3D and current sensors).
• Design printed circuit board (schematics, layout, assembly)
• Design firmware for different microcontrollers
• Design Graphical User interface (Python, C++)
• Design software for automatic measurements (Labview, Python) 
• Manage measurement campaign
• Data processing and reporting (Matlab, Python)
• Design demos for customers or marketing purposes
• Support customer  

Requirements

• Engineer passionate by technology and eager to learn new skills
• Familiar with electronic design
• Familiar with Firmware development (C, C++)
• Familiar with data processing (Matlab, Python Numpy)
•  Good communication skills. French or English speaker and able to write in English. 
• Good team player. 

Good to have

• Familiar with Software development (Python, C++, Labview)
• Familiar with Schematic and PCB Design (Altium or Cadence) 
• Familiar with Mechanical CAD (Solidworks)
• Mechanical workshop skills
• Familiar with Qt/pyside2, matplotlib, plotly, Flask 

Education

• Master or Bachelor’s degree in Electronic Engineering in an EPF or HES. 

Location

• MPS Tech Switzerland Sàrl, Route de Lully 5A, 1131 Tolochenaz (next to Morges)

Company Description

Monolithic Power Systems, Inc. (MPS) is one of the fastest growing companies in the Semiconductor industry. We are worldwide technical leaders in Integrated Power Semiconductors and Systems Power delivery architectures. At MPS, we cultivate creativity, are passionate about sustainability, and are committed to providing leading-edge products and innovation to our customers. Our portfolio of technology helps power our world -- come join our team and see how YOU can make a difference.

Job Summary

MPS is seeking an experienced business partner to provide financial and operational leadership supporting our global Facilities and IT infrastructure.  We have sales, engineering and production operations in Asia, North America and Europe and continue to expand globally.    

The Senior Finance Manager reports to the CFO and is based in San Jose, CA or Kirkland, WA  

Primary Responsibilities

•            Partner with Global Operations for long term space and equipment planning  

•            Evaluate major capital spending projects, site locations and local building requirements

•            Review contract terms and vendor negotiation

•            Create annual operating budgets for key sites

•            Prepare quarterly capital spending forecast, track actual spend with variance analysis

•            Work closely with the Property Managers of owned and leased facilities

•            Project Management of large cross-functional initiatives

•            Provide executive updates and track and evaluate key metrics

•            Assists with SOX and ITGC control documentation updates and testing

•            Annual review and update of allocation methodologies   

Position Requirement:

•            Minimum 10 years’ experience in similar role, preferably semiconductor industry  

•            Bachelor’s degree in Accounting or Finance

•            Excellent verbal and written communication skills

•            Solid attention to detail and excellent project management skills

•            Proven ability to work independently and cross-functionally

•            Must be willing to travel

Monolithic Power Systems, Inc. (MPS) is one of the fastest growing companies in the Semiconductor industry. We are worldwide technical leaders in Integrated Power Semiconductors and Systems Power delivery architectures. At MPS, we cultivate creativity, are passionate about sustainability, and are committed to providing leading-edge products and innovation to our customers. Our portfolio of technology helps power our world -- come join our team and see how YOU can make a difference.

MPS is seeking an experienced Manager to oversee the end-to-end processing of customer product claims including claim tracking, review and audit, negotiation, and settlement. This is a high-profile position that works closely with the product, quality, and field sales teams to stay closely aligned on risk areas and timely customer resolution.  In addition, the role partners closely with the FP&A and Accounting teams for budgeting and accruals. 

The Claims Manager reports to the Corporate Controller and will be based in San Jose, CA or Kirkland, WA.

• Develop processes and procedures to efficiently monitor global customer product claims
• Oversee the intake, validity and processing of product claims and supporting documents
• Monitoring claim administration and negotiation progress 
• Works closely with finance to forecast and administer claim settlements
• Determines the value of settlements and reviews settlement contracts  
• Works closely with insurance carriers to comply with reporting requirements 
• Assist with executive updates and ad hoc projects as needed 

• Minimum 5 years’ experience in similar role, preferably high-tech  
• Excellent verbal and written communication skills
• Solid attention to detail and excellent project management skills
• Wells versed in handling insurance documentation and legal liability 
• Bachelor’s degree in business administration, accounting or finance preferred
• Proven ability to work independently and cross-functionally

Field Sales Engineer (MPSnow)

Position Overview: 

Job Functions:

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently exceeding assigned revenue targets.
• Indirect management of Manufacturers Representatives and channel partners (distribution branches) supporting MPS products.  
• Work closely with MPS product division marketing and engineering personnel to identify market trends and customer specific requirements, leading to MPS leadership position at strategic accounts.  

Qualifications:

• Strong knowledge of target customers as well as industry trends and competitive landscape.
• Need technical ability to understand entire MPS product portfolio and the “go to market” strategy for each product line.
• Good people and analytical skills to manage strong sales personnel (including manufacturer representatives and channel partners) to succeed and continuously grow design wins, revenue and customer relationships.
• Must be able to grow management level and design engineering relationships at strategic customers.  
• Must have ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.  
• Good presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)
• Self motivated to work as an individual sales contributor in a field or home office.

Education Requirements:

• This position requires a technical degree (minimum bachelors), preferably in an engineering discipline – or a proven track record of success in selling electronic components.
• Will consider an experienced field applications or design engineer with a willingness to move to sales and a strong desire to succeed.

Location: San Jose, CA 

Field Sales Engineer (MPSnow)

Position Overview:  

Job Functions:

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently exceeding assigned revenue targets.
• Indirect management of Manufacturers Representatives and channel partners (distribution branches) supporting MPS products.  
• Work closely with MPS product division marketing and engineering personnel to identify market trends and customer specific requirements, leading to MPS leadership position at strategic accounts.  

Qualifications:

• Strong knowledge of target customers as well as industry trends and competitive landscape.
• Need technical ability to understand entire MPS product portfolio and the “go to market” strategy for each product line.
• Good people and analytical skills to manage strong sales personnel (including manufacturer representatives and channel partners) to succeed and continuously grow design wins, revenue and customer relationships.
• Must be able to grow management level and design engineering relationships at strategic customers.  
• Must have ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.  
• Good presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)
• Self motivated to work as an individual sales contributor in a field or home office.

Education Requirements:

• This position requires a technical degree (minimum bachelors), preferably in an engineering discipline – or a proven track record of success in selling electronic components.
• Will consider an experienced field applications or design engineer with a willingness to move to sales and a strong desire to succeed.

Location: Livonia, MI

Field Sales Engineer (MPSnow)

Position Overview: 

Job Functions: 

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently exceeding assigned revenue targets.
• Indirect management of Manufacturers Representatives and channel partners (distribution branches) supporting MPS products.  
• Work closely with MPS product division marketing and engineering personnel to identify market trends and customer specific requirements, leading to MPS leadership position at strategic accounts.  

Qualifications:

• Strong knowledge of target customers as well as industry trends and competitive landscape.
• Need technical ability to understand entire MPS product portfolio and the “go to market” strategy for each product line.
• Good people and analytical skills to manage strong sales personnel (including manufacturer representatives and channel partners) to succeed and continuously grow design wins, revenue and customer relationships.
• Must be able to grow management level and design engineering relationships at strategic customers.  
• Must have ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.  
• Good presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)
• Self motivated to work as an individual sales contributor in a field or home office.

Education Requirements:

• This position requires a technical degree (minimum bachelors), preferably in an engineering discipline – or a proven track record of success in selling electronic components.
• Will consider an experienced field applications or design engineer with a willingness to move to sales and a strong desire to succeed.

Location: Kirkland, WA or Pacific NW

This role is the central point of contact between our Global Strategic & Key customers and MPS. In this direct, customer-facing role you will build strong relationships through positive customer engagement and service excellence. Become a partner with the MPS global account teams.  

Primary Duties and Responsibilities:

• Daily review of open orders to align with available inventory and forecast
• Key point of contact for customer’s supply chain needs
• Collaborate with the Global Account Managers, Regional Sales, Planning, and the Product Line to manage the supply chain
• Manage and audit global contract pricing 
• Review and maintain regional monthly forecast
• Align with regional counterparts to track and support shared business
• Drive internal support for Customer NPI programs to ensure key scheduling milestones are met, track release schedule for new products, revisions, sampling, customer feedback, pilot run, and mass production with sales and FAE
• Administer RMA / customer material returns process to compliment regional teams and interface to QA and engineering teams
• Analyze customer records to ensure CRM data accuracy
• Perform weekly backlog analysis and gap management, monitor backlog CRD schedules and manufacturing committed schedules:
  • Understand end customer demands
  • Understand channel inventory
  • Provide WIP analysis 
  • Work with factory on allocation if needed
• Manage overall customer service function including customer delivery reporting, expedites, and confirmations to compliment local and factory CSR functions for assigned accounts/region
• Project management on additional operational initiatives on an as-needed basis

Other Duties and Responsibilities:

• Participate in proactive team efforts to achieve departmental and company goals.
• Always maintain the highest degree of honesty, integrity, and professionalism

Qualifications

• Minimum of 3 years of experience in a customer-facing role, preferably in Inside Sales and/or Field Sales, with semiconductor industry preferred
• Energetic team player with a demonstrated drive for high performance
• Detail-oriented
• Strong communication and interpersonal skills (oral & written)
• Adaptability to change in a highly dynamic/challenging work environment
• Self-motivated, driven, dedicated and willing to learn with a desire to succeed
• Strong organizational skills, ability to prioritize, multi-task and manage your own time
• Excellent problem-solving skills
• Supply Chain knowledge/experience is desired
• Advanced computer skills in Microsoft Office, specifically Excel. Experience with CRM systems (ideally Dynamics 365, SharePoint)

Overview:

MPS is seeking a highly self-motivated Applications Engineer with good knowledge in embedded firmware for power electronics to join the high-voltage department.  This person will develop firmware to control high-voltage (>400V) power supply for advanced topologies including inverter, isolated DC-DC Phase shift and  Resonant converter. 

Essential Functions:

• Develop control firmware (cortex M) for power electronics (DC/DC, AC/DC, DC/AC)
• Develop FPGA code for high advanced modulation and processing/filtering to be integrated in our integrated circuits.
• Define and execute system integration validation and debugging of power electronics solutions.

Qualifications:

• BS in Electronic and Electrical Engineering; MS/PhD is preferred 
• Experience with firmware development for power applications. 
• Good knowledge in power electronics, topologies, control, and modulation.
• Good knowledge in analog and digital design.
• Experience in control and implementation of DC/DC and AC/DC converter and control theory
• Proficient in structured firmware programming (C/C++, assembly, script languages) 
• Hands-on experience in verification and trouble shooting in an embedded firmware application 
• Ability to work creatively and analytically in a problem- solving environment 
• Good oral and written skills for communication and documentation 
• Self-motivated, strong team player 

Location:

Barcelona, Spain

Job Summary:

• This position is responsible for development of high power/high voltage semiconductor devices for industrial and automotive applications. This is a high visibility role, with an opportunity to work with cross-functional teams. The candidate will be involved all phases of development from product conception through release.

Essential Functions: 

• Work with technical marketing and application engineering to develop deep understanding of system requirements.
• Define SiC/Silicon/GaN power devices optimizing for application requirements, manufacturability, reliability, time to market and cost.
• Work with process engineering teams to execute device development.
• Work with product engineering and test engineering to develop test, characterization, reliability, and quality management strategies to drive device qualification and commercial release.
• Provide design risk assessments, mitigation plans, development lessons learned and proof of concepts.
• Keep up to date with developments in the industry and contribute to defining high voltage technology roadmap for the company.

Qualifications: 

• Technical knowledge high voltage device physics.
• Experience working with wide band gap power devices (SiC/GaN) is a plus.
• Experience in automotive power is a plus.
• Knowledge of power system topologies and system requirements is a plus.

Education:

• MSEE or higher in Electrical Engineering/ Physics / Material Science;
• OR BSEE or higher in Electrical Engineering/ Physics / Material Science with 2-3 years of relevant experience.

Location:

• San Jose, CA 

This is a junior level position in application/system engineering. Responsibilities include assistant research in new switching power technology, system power architecture, digital, analog, mixed signal IC products, technical support and training for US customers.

Job Functions

• Research for new generations of ACDC switching power technology
• Study and deep understanding of system power architecture across multi-platforms
• Work with design engineers, field applications team, and marketing to verify and develop new features for AC/DC ICs.
• Provide technical support and training for US customers
• Develop application reference circuits and system level power management solutions for AC/DC products
• Write articles, application notes, and other documentations.

Qualifications

• Entry-Level applicants welcome
• Open minded, rigorous, innovative.
• Strong system level knowledge in AC/DC converters.
• Rich hardware and bench experience in high voltage power supply development.
• Familiar with system level simulation and analysis with SIMPLIS and MathCAD.
• Good to have programming and digital control skill in power converters.
• Good understanding of power devices, ICs, and magnetic components.
• Fluent communication skills in English.
• Excellent writing and presentation skills.
• Self-motivated.
• Previous experience in a power supply manufacturer or power management IC company preferred
• MSEE, majored in power electronics

Location:

San Jose, CA or Barcelona, Spain

Principal Embedded Design Engineer

Job Summary:

As a Principal Embedded MCU Design Engineer, you will be responsible for defining & designing architecture with feature sets for Embedded uC SoCs for Power management products. You will also be responsible to build/lead digital design team in embedded MCU SoC designs.  The position requires both technical and leadership skills, while working closely with multi-disciplinary groups to drive & design key aspects of SoC feature set that meets the requirements of products.

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions/Responsibilities:

• Define & develop the chip level micro architecture and functional blocks
• Provide technical documentation with specifications, block diagrams, and requirements to stakeholders.
• Build/Lead the IC design team to design and verify the embedded MCU SoC designs.
• Collaborate with software team to develop software/firmware applications.
• Collaborate & work with different departments/stakeholders including for processor architectures, requirements, and tradeoffs, including Digital/Analog Design, software/firmware engineering, Application/Test Engineering, & Reliability/Operations to resolve design, application, or test issues.
• Develop system and chip level simulation verification techniques and methodology
• Perform RTL design/verification of the top/embedded sub-system
• Develop & write system/top simulation verification test cases/plans
• Research, select, integrate and verify IP blocks
• Assist with the development of company documentation and intellectual property

Qualifications

• Broad working knowledge with uC architecture(ARM), bus structure, memory controller and MCU peripherals.
• Proven hands-on experience in DV with embedded MCU for SoC products/applications.
• Familiar with SoC integration and understanding mixed-signal design, analog/digital test methodologies.
• Experience using communication protocols such as UART, I2C, SPI and USB.
• Proficient with standard DV languages(Verilog/SysVerilog/UVM)
• Knowledge of industry standard DV tools and embedded ARM toolchain for IC design
• Knowledge with MCU software development.
• 10+ year experience with MS or Ph.D degree.
• Solid English written, verbal, & communication/collaboration skills
• Experience in automotive IC products with functional safety knowledge preferred.
• Experience with FPGA development and verification preferred.

Location:

Barcelona, Spain 

Job Summary:

• Works as a technical liaison in the field to support customers in design and application of the company’s products.
• Preparing technical elements of proposal, formulating the intricacies involved in defining the technical solution guidelines for sales team support
• Troubleshooting system applications on customer's request, resolving other engineering issues regarding systems application.
• Conducting regular follow up on customer's activities, and monitoring the same for obtaining new sales opportunities
• Evaluating the customer's requirement regarding systems application and administering the technical, technological, and functional aspects of proposals accordingly as instructed
• Participating in different seminars, conferences, and meetings for promotion
• Should be self-motivated, with a desire to continually learn new product offerings & possess excellent communication & presentation skills.
• Willingness to conduct market research intelligence exercise to ascertain competitor’s information.

   Essential Functions:

• Provide technical support to Customers & Sales Channels Partners throughout territory.
• Ensure coordination of technical matters with the company.
• Manage Joint Development Programs with Customers.
• Need to be independent  

Qualifications:

• BS/BE or higher in Electrical Engineering
• Preferably with years of hands-on experience in analog power management electronics, "on the PCB" (fresh graduates are also welcome)
• Excellent communication / interpersonal skills
• Oral / written proficiency in the English language
• Ability to travel up to 50% of the time
• Ability to operate under minimum supervision
• Have some background on ACDC applications

Location: Bangalore, India

Job Summary:

• Works as a technical liaison in the field to support customers in design and application of the company’s products.
• Preparing technical elements of proposal, formulating the intricacies involved in defining the technical solution guidelines for sales team support
• Troubleshooting system applications on customer's request, resolving other engineering issues regarding systems application.
• Conducting regular follow up on customer's activities, and monitoring the same for obtaining new sales opportunities
• Evaluating the customer's requirement regarding systems application and administering the technical, technological, and functional aspects of proposals accordingly as instructed
• Participating in different seminars, conferences, and meetings for promotion
• Should be self-motivated, with a desire to continually learn new product offerings & possess excellent communication & presentation skills.
• Willingness to conduct market research intelligence exercise to ascertain competitor’s information.

   Essential Functions:

• Provide technical support to Customers & Sales Channels Partners throughout territory.
• Ensure coordination of technical matters with the company.
• Manage Joint Development Programs with Customers.
• Need to be independent   

Qualifications:

• BS/BE or higher in Electrical Engineering
• 5+ years of hands-on experience in analog power management electronics, "on the PCB"
• Excellent communication / interpersonal skills
• Oral / written proficiency in the English language
• Ability to travel up to 50% of the time
• Ability to operate under minimum supervision
• Have good relationship with metering customers, automotive and industrial customers 

Location: Pune, India

Sr. Digital Design Engineer          

Job Summary:  

A Sr. Digital Design Engineer leads the end-to-end design and development of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.   

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment.  

Essential Functions:  

• Digital Architecture Definition and Documentation. 

• RTL Design, debugging and Verification. 

• Verification metrics analysis. 

• IP Definition, Development, Integration and Verification. 

• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis. 

• LEC: constraints definition and debugging. Results and Reports analysis. 

• P&R support with MMMC definition and debugging. 

• DFT Implementation, debugging and reports analysis.  

• ATPG Generation and Simulation. 

• Gate-Level Verification. 

• Power Simulations and Analysis. 

• Timing Analysis and Sign-off. 

• AMS Verification support. 

• Post-Silicon Validation support. 

• Close interaction with other Departments for Product definition. 

Qualifications:  

• BSEE + 8 years of experience, MSEE + 5 years of experience in digital ASIC design.  

• Has the ability to work independently and collaborate with other teams or departments. 

• Solid knowledge of the full ASIC development process.  

• Excellent RTL Verilog or System Verilog coding skills.  

• Knowledge of standard Digital Verification languages (System Verilog, UVM) and metrics. 

• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA.      

• Excellent written/verbal communication skills and strong team work/collaboration.   

• Knowledge/Experience with the following is a plus:  

• Automotive standards 

• Embedded designs and/or firmware development 

• Knowledge of power management industry/applications  

• I2C, I3C, SPI, USB, PMBUS 

• FPGA design and validation 

• ARM designs 

• Scripting and automation languages like TCL, Phyton and C/C++ 

Location:  

Barcelona, Spain    

Position: Sr. Staff Analog Design Engineer

Job Description:

As a Sr. Staff level design engineer, you will be responsible for block level analog circuit design, simulation; schematic capture; layout verification and post-layout extraction and simulation; top-level integration and verification;

Location:  San Jose, California, US

Requirements:

• Solid design knowledge and experience in ADC design: SAR/Delta-Sigma/Counting/Pipeline 
• Good design knowledge in Low-Noise Amplifier/Op-amp/RF design is a plus
• Solid understanding of transistor level analog and digital circuit theory
• Good analog integrated circuit implementation skills and knowledge in reducing design risk
• Proficiency in design tools such as Cadence/Mentor
• Solid knowledge in layout design and extraction is a plus
• Knowledge of digital design flow, digital system, and analog/digital interface and integration is a plus
• Experience on mixed-mode system level simulation (i.e., AMS) on SOC is a plus
• Solid written & verbal communication abilities.
• Self-motivated, willing to learn new technologies, & capable of working effectively within a group of individuals across multiple disciplines (analog, digital, system/algorithms, packaging/ESD, test/application and etc.).
• Minimum Master Degree (M.S. or M.Eng.) in Electrical Engineering

Position Overview: The Internal Account Specialist performs a variety of customer and sales support functions, interfaces with sales teams, production planning, regional CSR’s and order management teams, and various other departments within the company.

• Communicate product information, order, and inventory status
• Manage quotes in a fast-paced environment to drive bookings
• Key point of contact for MPSNOW Sales team
• Manage expedite requests from distribution/manufacturing reps and customers, working with production planning teams and cross-regional Sales/customer service teams in accordance with customer requirements and manufacturing capabilities. Follow a pre-determined escalation path.
• Work with our accounts payable staff to monitor delinquent invoices.
• Provide timely and accurate responses to our authorized distributors, manufacturer’s representatives, and regional sales teams
• Analyze customer records to ensure CRM data accuracy
• Manage overall customer service function including customer delivery reporting, expedites, and confirmations to compliment local and factory CSR functions for assigned accounts/region
• Coordinate/follow up on the bi-annual stock rotation
• Additional accounts and projects may be assigned, as required

Other Duties and Responsibilities:

• Participate in proactive team efforts to achieve departmental and company goals.
• Maintain the highest degree of honesty and integrity at all times

Qualifications

• Minimum of 3 years of experience in customer service and/or sales, Semiconductor industry preferred
• Energetic team player with a demonstrated drive for high performance
• Detail-oriented
• Strong communication and interpersonal skills (oral & written)
• Adaptability to change in a highly dynamic/challenging work environment
• Self-motivated, driven, dedicated and willing to learn with a desire to succeed
• Strong organizational skills, ability to prioritize, multi-task and manage your own time
• Excellent problem-solving skills
• Supply Chain knowledge/experience is desired
• Intermediate computer skills in Microsoft Office, specifically Excel. Experience with CRM systems (ideally Dynamics 365, SharePoint)

Sr.Field Sales Engineer (Sr.FSE) Israel 

Job Summary:

This Sales person will be responsible for the MPS business in Israel. The goal is to develop and grow MPS business in the top accounts by maintaining existing top accounts or growing and to identify new high potential customers in different business segments as automotive, industrial, consumer and other available applications. 

Suitable candidate should have a strong sales background with customers and semi-conductor knowledge. 

Responsibilities:

• Contribute to MPS EU revenue gow 
• Meet sales targets as required by the Company 
• Work out and execute a strategy to grow MPS business in Israel
• Develop relationships with customers to contribute growth of the business 
• Develop and execute sales strategy and account penetration programs 
• Create new business/marketing for targeted applications and products 
• Provide service support for customers and sales channels 
• Ensure coordination of business matters with the Company 
• Cooperating with distributors / rep in the region
• Travelling up to 4 days per week. 

Desired attributes:

• Self-motivated to work as an individual sales contributor especially in a field and will be based in home office.
• Technical ability to learn entire MPS product portfolio and the “go to market” strategy for each product line.

Ability to engage strong sales personnel (including manufacturer representatives and channel partners) 

Qualifications:

Technical degree (minimum bachelors), preferably in an Engineering discipline or a proven track record of success in selling electronic components for 4+ years. 

Will consider an experienced Field Applications Engineer or Design Engineer with the willingness to move to Sales and a strong desire to succeed.

Excellent communication / interpersonal skills

Oral /written proficiency in English 

A valid driver’s license and a willingness to travel extensively 3-4 days per week

Location:

Israel, TelAviv region

Job Summary:

A Sr. Linux System’s Admin Engineer works in the installation, configuration and maintenance of industry standard EDA tools, general tools, Linux servers, User databases, etc., for digital/mixed-signal ICs design for leading edge technologies, among other tasks. Products include switching regulators, display drivers, audio amplifiers, precision linear circuits and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

If you have a solid software background and interest in supporting semiconductor chip design, this is the job for you.

Essential Functions:

• Linux system administration, e.g., network and server installation and management.
• GitLab server configuration, management and maintenance
• Build a standard environment and scripts for CAD tools.
• Develop scripts to improve CAD tools usage and administration. 
• Data synchronization and backup among different Linux servers.
• License installation, monitoring and management.
• Revision Control Server maintenance, management and support.
• Troubleshoot problems related to machine, Linux servers, network and CAD tools. 
• Development of a continuous integration plus continuous delivery environment applied to IC design.
• Installation, configuration, management and support of a Linux Grid-based Simulations. 
• Installation, maintenance and support of ASIC Mixed-Signal Design Tools in Linux Servers
• Working with configuration tools in Linux - Terraform, Ansible to implement monitoring, alerting and reporting in the hybrid cloud infrastructure to upkeep and improve IT Infrastructure robustness and performance.  
• Constantly evaluate new IT Infrastructure automation and monitoring tools to help adopt the right ones to better manage the production services and meet the IT Infrastructure SLA requirements
• Closely work with IT System Engineers for Servers, Network, Storage and IT Security Engineers, to identify, plan, execute and manage IT Infrastructure Automation tasks well. 
• Document processes and flows.

Qualifications:

• Proficiency in Unix/Linux admin and networking
• Proficiency in scripting languages (Tcl, Perl, Python, csh, Makefile, etc.) and OOP.
• Proficiency with Git and/or GitLab/GitHub
• Familiar with other revision control tools (SVN, ICManage, Cliosoft, etc.)
• Decent knowledge on Distributed Computing System (LSF or SGE) 
• DevOps knowledge and experience (CI, CD, pipelines, Jenkins, GitLab CI, etc.)
• SQL and NoSQL database experience
• Excellent verbal, written communication and interpersonal skills.
• Experience in system administration and supporting/installation of CAD tools.
• Experience with IT Infrastructure systems in Servers, Network and Storage systems and cloud technologies, cloud infrastructure and applications
• BSEE/BSCS or equivalent (MSEE/MSCS preferred) with 5+ years of experience.

Location: Barcelona

Job Summary:

This person will join the growing MPS field team focused on automotive, and serve as the technical support contact for key MPS accounts in South Florida. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve tactical and strategic product positioning.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Develop a solid technical understanding of our products and relevant solutions. 
• Provide technical support to customers to meet or improve upon customer’s requirements with MPS products and technical knowledge.
• Identify and develop new business opportunities to grow MPS business.
• Gather potential market moves and competitors’ activities for MPS product strategy.
• Educate and present to regional sales and customers MPS products and technology.

Qualifications:

• BSEE/MSEE with 5+ years power management and analog systems experience.
• Automotive experience highly preferred.
• Ability to interface directly with customers and solve customer problems.
• Ability to work independently with strong analytical skills, self-motivated and excellent interpersonal skills. 
• Ability to communicate at all levels written and oral. 
• Oral /written proficiency in English. 
• Willing to travel up to 25% of time to service accounts in FL.

Location:

Fort Lauderdale – West Palm Beach, FL area

Customer Service Representative 

Job Summary:

The Customer Service Representative will support the Regional Sales & Field Application Engineers in Germany about administrative / customer related tasks, like sample orders, follow up calls towards customers, clarifications with team / factory, communication with local distributors and reps. The person performs also various functions in the review, processing and entry of sample orders as well as providing status and shipping information of existing orders. 

Essential Functions:

• Review daily incoming sample requests
• Order entry of daily sample requests into system
• Follow up with customers about customer related tasks / topics
• Issue tracking numbers to sample requesters on shipped orders
• Provide material to Product Engineering and applications engineers as needed 
• Process orders, shipments and inventory for MPS e-commerce business
• Maintain and update sales and customer records
• Assist the customer service department as needed with daily tasks including but not limited to:
• Creating reports as needed to track sample transactions and sample distribution trends
• Provide data as needed to management on sample activity by customer; region, etc.
• Miscellaneous customer service tasks as needed; such as stock checks, expedites etc.

Qualifications:

Proven work experience as a Sales administrator or Sales support agent

Hands on experience with CRM software and MS Office (MS Excel in particular)

A team player with high level of dedication

Ability to work under strict deadlines

Ability to communicate between all levels of management

Ability to multi-task, prioritize, and manage time effectively

Languages       

• German & English (written and oral)

Location: Germany, Ettenheim or Munich

MPS is seeking a Senior Accountant to join our Global Finance team.  This is a critical and high-profile position that will play a critical role cross-functionally with FP&A, Operations, Legal and Tax to support general and technical accounting matters. The Senior Accountant reports to the Senior Accounting Manager and is based in San Jose, California. 

• Leads day-to-day accounting activities and month-end close by monitoring and reconciling general ledger accounts (including stock compensation, prepaids and accruals) and preparing journal vouchers and accounting analysis. 
• Proactively identifies and proposes accounting solutions for new or unusual business transactions and helps to ensure that the day-to-day accounting is consistent with corporate accounting policies, procedures, and GAAP.
• Prepare quarterly and annual SEC reporting tables for stock-based compensation
• Prepare quarterly and annual equity transactions reports for tax compliance
• Accounting and analytic support on M&A projects. 
• Gathers, organizes and maintain auditable records.   Responds to questions from our auditors during their routine review and audit of SEC filings.
• Assists with Sarbanes-Oxley compliance. 
• Provides ad-hoc support for special projects as necessary.

• Bachelor’s degree in Accounting or Finance
• CPA with minimum 3 years of accounting experience, including minimum two years at a major public accounting firm
• Excellent verbal, written, and organizational skills
• Advanced knowledge of Excel
• Stock/equity experience a plus
• Proven ability to work independently and meet strict reporting deadlines.

Overview:

The Lead / Sr. Network Engineer will join a dynamic and fast-growing IT organization in San Jose, California, supporting a global organization with a major presence in the US, EU, and APAC.  This position is based in San Jose, CA, and requires in-depth technical expertise in networking and security-related technologies, architectures, and systems. 

Job Description: 

Essential Duties and Responsibilities:

• Lead implementation, maintenance, monitoring, and support of enterprise networking and InfoSec infrastructure such as routers, switches, firewalls, SDWAN, WIFI, etc.
• Ensure the infrastructure’s stability, reliability, scalability, and compliance with security and regulatory requirements globally.
• Perform (WAN/SDWAN/LAN) traffic analysis to diagnose and resolve issues proactively.
• Lead research and evaluation of new networking and InfoSec technologies as required to improve existing infrastructure continuously.
• Develop detailed designs using industry-standard best practices and best-of-breed technologies.
• Maintain and support core network services like DHCP, DNS, 802.1X, etc. 
• Contribute to capacity planning initiatives by monitoring and analyzing network and compute resource usage to plan for hardware upgrades.
• Handle field support and trouble ticket resolution/escalation.  
• Mentor junior staff and provide knowledge transfer to team members

Qualifications

• University degree in the technical field with 8 – 15 years experience and ongoing training in Enterprise IT. 
• Proficiency in managing Arista/Aruba/Cisco/Juniper switches, Palo Alto Firewalls, Palo Alto Panorama, Palo Alto Global Protect, SilverPeak SDWAN, Juniper MIST WIFI, etc.
• Deep knowledge of BGP/OSPF routing protocols.
• SNMP network monitoring
• Cloud networking – Azure, AWS, and OCI
• PKI
• 802.1X
• IAM
• Network Security assessment tools
• Excellent verbal and written communications skills (Mandarin Chinese a plus).

This is a senior level position in application/system engineering. Responsibilities include defining and debugging analog IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support and technical training.

Job Duties:

• Work with TME, design engineers, and field applications team, to define and debug analog IC products, specifically in automotive and industrial product line. 
• Work with customer and TME team to provide total power solution. 
• Develop application reference circuits and system level power management solutions for automotive SoCs. 
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products. 
• Provide application support and technical training for key customers and field application engineers
• Prior experience in designing, debugging and defining these products are highly preferred. 

Requirements:

• 5+ years of hand-on experience in switch mode power supply designs. 
• Fluent communication skills in English 
• Excellent writing and presentation skills 
• Self-motivated 
• Previous work experience in a power supply manufacturer or power management IC company is preferred

Locations:

• San Jose, CA
• Livonia, MI

This is a position with the technical marketing and application engineering team. Responsible for the definition and development of analog IC and module products for automotive applications. Job duty includes competition analysis, simulation and bench verification for new product ideas, author product specifications, provide reference designs, evaluate new products, and write datasheets and application notes.

Job Duties:

• Work with IC designers, packaging, marketing and field team to define innovative products. 
• Work with customers on system designs with existing products or developing new products.
• Provide application support and technical training for key customers and field application engineers
• Write datasheets, application notes, design notes.

Requirements:

• 5+ years of hand-on experience in switch mode power supply designs. 
• Fluent communication skills in English 
• Excellent writing and presentation skills Self-motivated 
• Previous work experience in IC company is preferred

Locations:

• San Jose, CA
• Livonia, MI

Monolithic Power Systems (MPS) provides power circuits for systems found in cloud computing, telecom infrastructure, automotive, industrial and consumer applications.

 MPS is seeking an energetic, efficient, self-motivated and resourceful team player to be a member of its Finance-Accounting/Administration staff supporting our local office activities in Ettenheim, Germany, as well as for other European subsidiaries.  

Essential Functions:

• Customer service and Accounts receivable: 

- Customer point of contact for services provided by our lab. 

- Handles PO, billing, collection, scheduling and others.

• Accounts Payable: Invoice registry, approval and payment tracking, 
• Reporting to regional HQ - JE preparation, reconciliation and audit supports.
• Facility Admin Support: Coordination with vendors and service providers.

PO, delivery, etc. 

• Supports Health and Security plan, implementation and document maintenance.
• Supports ESG reporting.
• Support for ad hoc projects as assigned.

QUALIFICATIONS:

• BS/BA degree in accounting, administration or related field
• 1-3 years’ experience 
• Intermediate knowledge of Excel. 
• Fluent in German and English (C1) (Other EU language is a +)
• Excellent verbal and written communication skills. 
• Excellent analytical and organization skills. 

Job Summary: 

MPS is seeking an ESG Analyst and Corporate Development Support for the legal and corporate development team. This role is primarily focused on the development of cohesive policies and messaging over new business relationships regarding environmental and social data. You will be responsible for collaborating with the corporate development team in establishing and executing ESG related policies, procedures, and external reporting projects. 

Essential Functions: 

MPS is seeking someone with a keen eye for detail, organization, and adaptable within a fast-paced environment. You get personal satisfaction from analyzing problems and delivering solutions to improve the business and can perform the following functions:

• Collect, analyze, and present relevant information to corporate development team on ESG related matters, including benchmarking analyses, news releases, and issue-specific research.
• Support due diligence procedures within ongoing M&A projects, specifically regarding ESG corporate correspondence and policy development.
• Preparation of professional documentation supporting the enhancement of MPS environmental and social initiatives.
• Assists in the development of ESG strategy, communications, and reporting projects.
• Assist in the preparation of public disclosures, including within the ESG reporting frameworks, SEC disclosures, and other reporting bodies
• Support company’s responses to third-party evaluators, rating and ranking organizations including ISS, MSCI, CDP, etc.
• Stay up-to-date with reporting frameworks and standards, as well as rating agency expectations; identify gaps between stakeholder expectations and company reporting.
• Effectively communicate with various internal and external stakeholders related to inquiries and requests for ESG information; collaborate with colleagues/subject matter experts to obtain relevant information.
• Partner with cross-functional teams to facilitate ESG-related campaigns.

Qualifications:

• Bachelor’s degree or four or more years of work experience. A degree in Business, Finance, or Accounting preferred but not required
• Two or more years of relevant work experience.
• Experience in business development, ESG ratings agencies, or proxy advisors.
• Project management experience.
• Strong verbal and written communication skills
• A high degree of analytical capability with the proven ability to structure a business case around a high-level strategic vision
• Great attention to detail and ability to analyze data, leveraging information to provide clear, concise and supported recommendations for action
• Strong presentation and collaboration skills and an ability to engage with stakeholders at any level in the business
• Experience with non-financial reporting (i.e., environmental or human capital metrics)
• Familiarity with ESG reporting frameworks and recommendations (i.e., GRI, TCFD, CDP)
• Experience with ESG ratings and rankings including ISS, MSCI, CDP, etc. Familiarity with ESG ratings and rankings portals
• Proficiency in Microsoft Office

Location: Kirkland, WA

This position will be the company-level leader to support our Environmental, Social, and Governance (ESG) team to track and report Scope 1, 2, and 3 greenhouse gas (GHG) emissions data, and assist with  ESG initiatives worldwide. The position will require a demonstrated passion for  ESG and a keen eye for detail. 

Primary Responsibilities:

• This role is primarily focused on the operational mechanics of inventorying, measuring, and reporting progress toward public targets and required disclosures in the environmental, social and governance (ESG) space.
• Support and coordinate the efforts to obtain scope 3 data from the MPS supply chain of subcontractors in global sites with management support.
• Interface with customers to communicate MPS’ commitment to ESG, provide ESG performance data, highlight ESG initiatives, complete environmental surveys and address all other related environmental sustainability topics.
• Responsible for coordination with internal stakeholders as part of cross-departmental ESG team (including legal, compliance, HR, Facilities, QA, and product lines) to develop, implement and manage ongoing globally standardized environmental sustainability dataset under key reporting frameworks showing progress towards internal & external sustainability objectives, financial compliance and more.
• Maintain scope 1 and 2 data and online GHG platform for the global facilities team.
• Provide internal training to MPS personnel supporting ESG initiatives, goals, reporting, etc.
• Complete required monthly, quarterly, and annual reporting with appropriate reporting metrics under key reporting frameworks.
• Serves as subject matter expert for ongoing facilities projects managing data and green building certifications.
• Research new and innovative technologies to assist in achieving GHG emission reduction goals.
• Track waste data on monthly basis and identify areas of opportunity.
• Contribute toward internal and external sustainability goal setting.
• Create necessary sustainability training for regional employees.
• Work with facilities and real estate teams to implement initiatives to reduce Scope 1, 2 & 3 emissions.
• Conduct benchmarking and research on sustainability trends.
• Use appreciable ingenuity and innovation to independently research, develop, and implement new energy, water, waste and sustainability programs and initiatives under the general direction of the Facilities Sr. Manager.
• Facilitating and evidencing sustainability compliance requirements.
• Support other Facilities related tasks and projects.

Desired Skills:

• Work experience in either sustainability related or real estate related role.
• Understanding of sustainability related corporate reporting frameworks and standards, including GHG protocol, TCFD, CDP, and GRI.
• Environmental or ESG Compliance experience
• Strong organizational and analytical skills, including prior project management experience.
• Ability to make effective presentations on complex topics to an internal department, large group of employees, and/or management. 
• Team-management and leadership skills.
• Time management skills with the ability to meet deadlines.

Qualifications:

• Educated to a Bachelor’s degree (BA/BS) level or greater from four-year College or University ideally in sustainability related subject and a minimum of three years of related experience and/or training ideally in global high-tech companies.
• Minimum of one year’s experience in compliance program management.
• Excellent communication and project management skills.
• Solid organizational skills, including multitasking and time-management.

Locations:

• San Jose, CA or Kirkland, WA

Job Summary:

MPS is looking for a candidate with a strong precision analog/mixed signal background who can manage and inspire a team of analog IC design engineer to develop the next state of the art Battery Management products.  This candidate will plan and direct analog design engineering work, assists in resolving technical challenges, in addition to acting as a hands-on individual contributor.  The candidate will work closely with other teams including digital, verification, and technical marketing engineers to ensure product requirements are achieved. 

Essential Functions:

• Plans and directs the work of a group of analog IC design engineers to maintain product schedules
• Ensures projects adhere to product development standards
• Ability to translate system level requirement into detail block level operating specifications
• Strong transistor level design skills
• Participates in the entire product development cycle, from product definition through product release.
• Oversees and mentors development of more junior engineers

Qualifications:

• BSEE / MSEE with 10+ years of experience
• Solid background with precision analog/mixed signal circuit design
• Familiarity with low power design techniques
• Ability to motivate department efforts to accomplish goals
• Demonstrate ability to successfully bring products to market
• Good verbal and written skills

Location:

Chandler, AZ

Job Summary:

The Senior Accountant is a key member of the MPS Finance and Accounting Team and is responsible for the accuracy and integrity of various ledger accounts, timely month-end close and financial reporting activities, key controls and business processes, and a variety of financial and analytical support activities for MPS and its subsidiaries in Asia and Europe. 

The Senior Accountant reports to the Accounting Manager and is based in Kirkland, Washington.

Essential Functions: 

• Leads day-to-day accounting activities and month-end close by monitoring and reconciling general ledger accounts (including prepaid, accruals, leases, compensation, fixed assets) preparing journal vouchers, and providing management with timely and accurate reporting
• Proactively identifies and proposes accounting solutions for new or unusual business transactions and helps to ensure that the day-to-day accounting is consistent with corporate accounting policies, procedures, and GAAP.
• Responsible for the monthly review of financial results and variance analysis as compared to forecast, goal, and last year for assigned areas.
• Responsible for monthly Balance Sheet review and for resolution of all outstanding issues.
• Provides ad hoc support to the finance team as needed
• Responsible for assisting with Sarbanes-Oxley compliance

Qualifications:

• BS/BA degree in accounting or related field
• US GAAP accounting knowledge with 3+ years’ of accounting experience, including Big 4
• CPA Preferred
• Excellent verbal and written communication skills.
• Excellent analytical and organization skills.
• Intermediate knowledge of Excel.
• Must be able to multi-task and work independently with minimal supervision
• Can effectively apply accounting knowledge to solve for day-to-day operational needs as well as ad hoc projects

Job Summary:

 Responsible for the global product marketing activities of audio amplifier products: 

 Essential Functions:

• Drive and track new business opportunities 
• Understand system requirements, market trends, key customers’ requirements in the audio amplifier market 
• Work closely with design engineers, technical marketing engineers and key customers to define new products and launch to market
• Generate and maintain product collateral and conduct product training for customers and field 
• Develop and manage pricing strategy for new and released products

Qualifications:

• Bachelor degree in Electrical Engineering with a minimum of 7 years product marketing or application engineering experience in analog semiconductor companies
• Knowledge of audio amplifiers strongly preferred
• Experience in automotive audio amplifiers preferred
• Excellent communication and presentation skills

Requirements:

• Able to travel globally up to 25% of time

Education:

• Bachelor of Electrical Engineering

Location: San Jose, CA, Kirkland, WA or Barcelona, Spain

Job Summary:

MPS is seeking a self-motivated individual who will help to define our new product strategy and execution. This individual will work with IC design, Field & Factory Application Engineers, Sales, and Marketing Communications to ensure the timely and successful launch of new products into the marketplace. Strategic involvement includes product definition, market & competitive analysis, and managing new product design activity. Tactical responsibility includes new product releases, advertising, and marketing collateral. The PMM will be involved in all inquiries for MPS products from sales, applications engineers and customers via telephone or electronic communication. Travel up to 30% of the time might be necessary.Essential Functions:

• New Product Definition
• New Product Launch
• Pricing
• Competitive analysis
• Customer visits and product promotion
• Troubleshooting issues and problems
• Q & A from the field and customers
• Promotion of the products through advertising, editorials, written articles and other collateral materials 

Qualifications:

• 5-10 years experience (5 yrs minimum) in Marketing / Applications within an Analog IC Company
• Power management background is essential
• Computing background is a plus
• Excellent verbal and written communication skills
• Ability to thrive in an extremely fast-paced, start-up environment.
• BSEE or equivalent required

 Location:

San Jose, CA

Who we are

We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.

What we do

We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications.

We are looking for a NET and Database developer  

Essential Functions:

• Develop new and redesign existing features of our product
• Develop Graphical User Interface (front-end and back-end) for our testing and final product 
• Support the integration in our tools/databases with our product and cloud platform
• Keeping track of changes made to code with Git version control system
• Ability to work creatively, passion for writing code and complex problem solving
• Lead other junior programmers

Qualifications:

• Bachelor or master’s in computer science and experience in the software development.
• Board experience in .Net, C# languages, Web architectures ASP.Net, ASP.Net Core MVC.
• Proficiency with SQL database.
• Familiar with XML and related technologies
• Experience in Amazon Web services database is a plus.
• Experience in software managing hardware is a plus.
• Good oral and written skills for communication and documentation 
• Self-motivated, strong team player 

Location:

Barcelona, Spain 

Who we are

We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.

What we do

We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications.

Who we look for

MPS is seeking a highly self-motivated intern with passion for hardware and good knowledge power electronic.  He will support the development of solution for high voltage application (including DC/DC and AC/DC topologies, current sensors, isolated driver) working inside our hardware department. 

Task:

• Validate power integrated circuits to meet the required specifications 
• Prepare hardware and software setups, together with our hardware & simulation team, to be able to measure all required parameters of our IC.
• Develop schematic and PCB to for new solutions.
• Develop device modeling (spice)
• Work with IC design team to debug and troubleshooting the device under test.
• Generate documentation and reports with all performed test.

Qualifications:

• MS in Electrical or Electronic Engineering; 
• Hands-on experience in verification and trouble shooting electronic circuits (firmware and hardware). 
• Experience on the use of electronic laboratory equipment including oscilloscope and spectrum analyzer.
• Ability to work creatively and analytically in a problem- solving environment 
• Good oral and written skills for communication and documentation 
• Self-motivated, strong team player 

Location:

Barcelona, Spain 

This is an important customer-facing, hands-on role in an emerging Automotive Quality organization in a rapidly growing semiconductor IC company. The key responsibilities are to work seamlessly with related Engineering, Production, Business groups and other QA functions to ensure timely responses and efficient closure of customer Quality requests, such as handling field returns/8D/FA cases, and audit support. He/she will interface to many internal functions, as well as directly with customers, in responding to requests and managing customer quality situations. As such, candidate should have a solid quality / engineering background, along with good team competence and communication skills.

Major Responsibilities

• Manage customer quality requirements, inquires/questions or issues, as the front-line interface.
• Manage Quality issue diagnoses, root-cause analysis with FA and other groups as hand-on contributor for the assigned customer accounts. 
• Project-manage Automotive customer-audits in both HQ and our location in Chengdu as the customer-facing contact for MPS and our sub-cons.
• Write FA and co-develop 8D reports as well as manage customer-facing communications.

 Basic Qualifications

• 10-15 years experiences in Semiconductor IC Engineering and Quality functions, with customer-facing skills and experiences.   
• Experience in at least two of the following areas: Customer Quality Engineering, Quality Management Systems, PCN Administration, Automotive Quality, Reliability Engineering, Failure Analysis, Product Engineering and Production Quality Control in the Semiconductor IC industry.
• Good understanding of Semiconductor manufacturing process, key aspects of IC tests, and how ATE test correlates with device behavior and quality
• Good knowledge of IC silicon/package fail mechanisms/symptoms, Reliability and FA process and testing tools and reporting.
• Hands on skills in Quality tools and methodologies, statistics and structured problem solving techniques.
• Proactively drive issue resolution as a seasoned team player with excellent communication skills, can effectively handle sensitive and proprietary information well.
• Good influence and negotiation skills to respond to difficult news and situations.

Education Requirements Bsc EE required; Msc EE preferred

Location: San Jose, CA, Kirkland, WA or Detroit, MI

Patent Engineer

• Work closely with R&D engineers to identify patentable ideas 
• Assist inventors in filing timely and accurate invention disclosures
• Prepare, file and prosecute patent applications meeting international standards
• Conduct patent search and analysis
• Provide intellectual property training to R&D engineers

• Master degree in Microelectronics, Electronic Engineering, Communication Engineering or related Engineering
• Excellent command of English
• Confidence and communication skills at all levels 
• Strong reasoning ability and writing skills
• Attention to details and deadlines
• Experience in R&D, or drafting and prosecuting patent applications is preferred

Job Summary:

As Business Development Manager, you will be responsible for creating new business and growing revenue for the sensor and motor driver product lines in North America (N.Am). You will work closely with our N.Am field application and regional sales team to drive new business. 

The ideal candidate is self-motivated with a passion to create and foster new business and thrive on the opportunity to grow the sensor and motor driver product line revenue and grow MPS’ presence in key accounts. At MPS, our culture is to get the business as fast as possible. Our sensor and motor driver product lines serve a large market from consumer applications to automotive. Our solutions are extremely sticky, which translates to an efficient design-in conversion to production. 

Responsibilities:

• Primary Sensor and Motor Driver market focus: 
  • OEM and Tier 1 N. Am automotive 
  • N. Am industrial 
• Identify and manage new sensor and motor driver business opportunities at existing and new accounts        
• Grow year-year revenue in-line with Company objective
• Validate and fine-tune product roadmaps
• Guide customers through the development cycle from design-in to production
• Manage the design-in process and have intimate knowledge of the key decision makers, next actions, and requirements to win the design. 
• Collaborate with field sales to identify appropriate contacts in customer organizations
• Provide regular training for field application and sales engineers 
• Consolidate customer feedback and provide input to product roadmap

Qualifications:

• 5+ years’ experience in IC solution business development, application support or sales
• Previous experience in sensor IC business preferred 
• Ability to translate market and technology trends into business opportunities
• Demonstrate strong communication skills
• Willing to travel 
• Self-motivated and organized
• Magnetic position and current sensor experience is a bonus

 Education:

• BSEE or higher

 Location:  Michigan, USA

Job Summary:

MPS is seeking a Sr. Module Design Engineer for the power module team. This role is responsible for the development of the highly integrated MPS power module products. In this role, you will design high current, high density DC-DC power modules with cutting-edge monolithic power management ICs, coordinate and lead the power module development from planning through completion.

Essential Functions:

• Define, and design the highly integrated power module solutions.
• Magnetic component simulation, and integration with module product.
• Drive the cross-functional collaboration with the package, test, product and QA team to bring a power module solution from concept to mass production.
• Develop reference circuit schematic and system level power architecture for demonstrating the advantage of cutting edge power module solutions of MPS.
• Validate and characterize new products.
• Provide technical support and training for customers and field application engineer.

Qualifications:

• BS or MS in Electronics/Electrical Engineering;
• 2+ years of hands-on experience with DC/DC power converter design, debug and optimization.
• Familiar with inductor, transformer designs, simulation and manufacture.
• Proficiency with PCB design and simulation tools such as Allegro PCB Editor, Capture CIS, Altium Designer.
• Highly enthusiastic in solving multi-disciplinary challenges in fast paced product-oriented environments.
• Effective priority management skills across multiple tasks.
• Excellent verbal, written and presentation communication skills.

Education:

• BSEE or higher;

Location:

• San Jose, CA; Kirkland, WA; Chandler, AZ

Job Summary:

• This position is responsible for the definition and development of high power/high voltage semiconductor packages. Job duty includes the definition, analysis, simulation and verification for new product package designs, generates and review CAD models and drawings.

Essential Functions:

• The candidate will manage the development of MPS’ next generation high power, high voltage discrete packages and integrated power modules for automotive and industrial applications including SiC and GaN power FETs.
• Work with technology development, technical marketing and outside contractors including OSATs to define package specifications.
• Execute package development optimizing for manufacturability, reliability, time to market and cost.
• Execute package performance optimization including but not limited to thermal, power density, footprint and scalability, provide design specifications and BOM
• Provide design risk assessments, mitigation plans, development lessons learned and proof of concepts
• Keep up to date with developments in the industry and competitive developments and define high power packaging roadmap for the company.

Qualifications:

• MSEE or higher in electrical/ mechanical/material engineering;
• Strong technical background in high voltage discrete or power modules including thermal analysis, failure analysis and metrology tools.
• Deep understanding of semiconductor device fabrication and assembly technology;
• Experience working with wide band gap power devices (SiC/GaN) is a plus.
• Experience in automotive power is a plus.
• Advanced knowledge of elasticity, plasticity, failure, and heat transfer in materials/structures;
• Advanced knowledge of materials properties and associated analytical models used in mechanical engineering problem solving;
• Knowledge of JEDEC, IEC, IPC and AEC standards are desired.

Education:

• MSEE or higher;

Location:

• EU, US, China     

Job Summary:

This position is responsible for the definition and development of high power/high voltage semiconductor packages. Job duty includes the definition, analysis, simulation and verification for new product package designs, generates and review CAD models and drawings.

Essential Functions:

• The candidate will manage the development of MPS’ next generation high power, high voltage discrete packages and integrated power modules for automotive and industrial applications including SiC and GaN power FETs.
• Work with technology development, technical marketing and outside contractors including OSATs to define package specifications.
• Execute package development optimizing for manufacturability, reliability, time to market and cost.
• Execute package performance optimization including but not limited to thermal, power density, footprint and scalability, provide design specifications and BOM
• Provide design risk assessments, mitigation plans, development lessons learned and proof of concepts
• Keep up to date with developments in the industry and competitive developments and define high power packaging roadmap for the company.

Qualifications:

• MSEE or higher in electrical/ mechanical/material engineering;
• Strong technical background in high voltage discrete or power modules including thermal analysis, failure analysis and metrology tools.
• Deep understanding of semiconductor device fabrication and assembly technology;
• Experience working with wide band gap power devices (SiC/GaN) is a plus.
• Experience in automotive power is a plus.
• Advanced knowledge of elasticity, plasticity, failure, and heat transfer in materials/structures;
• Advanced knowledge of materials properties and associated analytical models used in mechanical engineering problem solving;
• Knowledge of JEDEC, IEC, IPC and AEC standards are desired.

 Job Summary:

The FAE will provide technical support for customers and to the broader Sales and FAE team.  The FAE will assist in developing opportunities incorporating MPS products and follow those through to production solutions. The FAE identifies and shares current and emerging customer technical needs to improve MPS product positioning and guide new product development.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.
• Dynamic work environment where collaboration with engineers internally and externally will involve technical activities like
• Building power proposals to answer customers’ requirements
• Modifying and testing MPS EVBs to acquire preliminary data according to customers’ specs
• Reviewing schematic and layout of MPS power solutions to ensure best practices for the devices are implemented
• Powering up first prototypes with customers and assisting with characterization of MPS devices in the system
• Debugging, as needed, to further optimize customers’ MPS power designs

 Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher 
• Must be open to relocate to another territory

Locations:

• Southern California

 Job Summary:

The FAE will provide technical support for customers and to the broader Sales and FAE team.  The FAE will assist in developing opportunities incorporating MPS products and follow those through to production solutions. The FAE identifies and shares current and emerging customer technical needs to improve MPS product positioning and guide new product development.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.
• Dynamic work environment where collaboration with engineers internally and externally will involve technical activities like
• Building power proposals to answer customers’ requirements
• Modifying and testing MPS EVBs to acquire preliminary data according to customers’ specs
• Reviewing schematic and layout of MPS power solutions to ensure best practices for the devices are implemented
• Powering up first prototypes with customers and assisting with characterization of MPS devices in the system
• Debugging, as needed, to further optimize customers’ MPS power designs

 Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher 
• Must be open to relocate to another territory

Locations:

• San Jose, CA 

 Job Summary:

The FAE will provide technical support for customers and to the broader Sales and FAE team.  The FAE will assist in developing opportunities incorporating MPS products and follow those through to production solutions. The FAE identifies and shares current and emerging customer technical needs to improve MPS product positioning and guide new product development.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.
• Dynamic work environment where collaboration with engineers internally and externally will involve technical activities like
• Building power proposals to answer customers’ requirements
• Modifying and testing MPS EVBs to acquire preliminary data according to customers’ specs
• Reviewing schematic and layout of MPS power solutions to ensure best practices for the devices are implemented
• Powering up first prototypes with customers and assisting with characterization of MPS devices in the system
• Debugging, as needed, to further optimize customers’ MPS power designs

 Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher 
• Must be open to relocate to another territory

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. Candidate will be expected to lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will also be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 

• Digital Verification: Development test plans, test benches and automated test cases
• Knowledge and/or responsibility in synthesis, timing closure, and formal verification.
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 5+ years experience in design plus verification of ASIC or FPGA
• Strong knowledge of ASIC development process and digital design techniques
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 

• Experience with the following is desired:
• Embedded designs and/or firmware development
• Automotive FuSA and ASIL Standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• GITLab 

Location:

Barcelona, Spain 

Job Summary: 

A Mixed-Signal Design Engineer assists on the Analog Design and Analog-Digital interface definition, design, validation, verification and integration of mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Analog and Mixed-Signal design.
• Analog-Digital Interface Definition and Documentation.
• Behavioral Modelling of Analog Blocks. Analysis to verify architectural choices and trade-offs
• Validation and Verification of the Analog and Mixed-Signal.
• Analog IP Definition, Development, Integration and Verification.
• Layout Design.
• Analog Mixed-Signal simulations and debugging.
• Assist the Digital Design Team with Timing, Input/Outputs and DFT Constraints.
• Post-Silicon Validation and Characterization support.
• Close interaction and collaboration with Analog Design, Analog Layout, Digital Design Engineers, Digital Verification and Digital Physical Engineers.

Qualifications: 

• BSEE + 5 years of experience, MSEE + 2 year of experience in digital ASIC design. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development and Silicon fabrication process.
• Strong background in transistor level and analog/mixed circuit design.
• Understanding of device mismatch, noise, linearity and other analog effects.
• Solid experience in Layout design and knowledge of best-practice techniques.

• Strong experience with simulation tools such as spectre, hspice, and MATLAB. 
• Proficient with Cadence circuit design tools like ADE-L and ADE-XL. 
• Understanding and experience in running complex simulations such as Monte-Carlo, noise simulations and stability analysis.
• Experience running DRC and LVS using Calibre, ICV, etc.
• Experience running Verilog-AMS mixed-mode simulations.

• Verilog, System Verilog and Verilog-A coding skills for behavioral modelling. 
• Knowledge of DFT Techniques such as SCAN, LBIST, ABIST and IDDQ.
• Knowledge of STA and Mixed-Signal Timing and Input/Output Constraints for Syn and P&R.
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 
• Automotive and ASIL Standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• Scripting and automation languages like Skill, TCL and Phyton

Location: Barcelona, Spain

Job Summary: 

A Sr. DFT Engineer leads the end-to-end design, implementation, verification, validation and debugging of Digital and Mixed-Signal ICs DFT architectures and solutions utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Development and implementation of DFT Architectures and Techniques.
• RTL Design, debugging and Verification.
• Physical implementation, debugging and Gate-Level Verification.
• Generation of High-Quality Test and Debug Patterns.
• STA and Power Analysis of DFT Modes.
• Silicon bring-up, support, failure analysis, backtracking and diagnosis.  
• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis.
• LEC: constraints definition and debugging. Results and Reports analysis.
• ATPG Generation and Simulation.
• Analog, Digital and Mixed-Signal AMS Verification support.
• Close interaction with other Departments (Analog, Testing, Product, Digital).
• Analog and Digital Functional Testing.
• Test Plan Definition for Analog and Digital Structural and Functional Testing.

Qualifications: 

• BSEE + 8 years of experience, MSEE + 5 years of experience as a DFT Engineer. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development process.
• Excellent RTL Verilog or System Verilog coding skills.
• Knowledge of standard Digital Verification languages (SystemVerilog/UVM) and Gate-Level Sims.
• Experience with Standard and Advanced DFT Techniques (ATPG, SCAN, IDDQ, Delay Fault, SCAN Compression/EDT, Reduced Pin Count SCAN, Boundary SCAN, LBIST, MBIST, ABIST, JTAG, etc.).
• Proficiency with ATE implementation, debugging and failure backtracking.
• Excellent understanding of Trade-Off between Test Quality and Test Time.
• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA.       
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 

• Automotive FuSA and ASIL Standards

• ASIC tool knowledge(Cadence, Synopsis) and DFT tool knowledge(Modus, Tetramax, Testsent Fastscan/TestKompress, TestInsight, etc)

Location:  Barcelona, Spain

Job Summary: 

A Principal Digital Verification Engineer will define and lead the development of the Digital Verification framework and infrastructure of complex digital, embedded uC, and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• UVM and System Verilog based Digital Verification environment definition and development.
• VIPs standardization, definition, development and documentation.
• Define VIP’s integration into the Project’s Digital Verification environment.
• Digital Verification Metrics definition for RTL and Gate-Level Verification.
• Test Plan definition and development.
• Digital Verification Automation and Scripting.
• Regression’s infrastructure definition, development and management.
• Close interaction with Senior Digital and Analog Designers to develop VIP models.
• Lead the Digital Verification Team.
• Lead and Supervise Digital Verification Tasks of multiple projects.
• Review Digital Verification Metrics and Results of multiple projects.
• Define and design Digital Verification Top-Level Tests.
• Analyze and debug test results, code coverage and functional coverage. 
• Digital Verification estimation, planning and scheduling to meet tape-out dates.

Qualifications: 

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 10+ years of strong experience in both RTL and Gate-Level Verification.
• Proficient in Digital Verification Industry Languages (UVM, System Verilog) and Standards.

• Proficient Level in DV skills and areas: Constraint random tests, SV assertions, coverage metrics, analog and digital DV modelling, DV test plans, regression analysis and reports, UVM DV Agents (Monitor, Driver, Scoreboard), etc.  

• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Excellent scripting and automation skills using TCL, Python or C/C++.
• Leadership skills to technically guide the DV Team and mentor Jr. DV Designers.
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge/Experience with the following is a plus: 
• Embedded design verification and/or firmware development for Arm/Risc V

• Automotive FuSA and ASIL Standards

Location: 

Barcelona, Spain

Job Summary: 

A Jr. Digital Verification Engineer assists in the development, integration, design and verification of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Generation of test plans based on design requirements and product datasheets of digital / mixed-signal IC’s.
• Close interaction with Senior Digital and Analog Designers to develop System Level and Behavioral Models. 
• Create Digital Verification environments with UVM and SystemVerilog.
• Write Digital and Mixed-Signal testcases and assertions/checkers.
• Analyze and debug test results, code coverage and functional coverage. 
• Document and support detailed test plans and reviews.
• Develop Verification IPs and standard tests, environments, checkers, etc.
• Automation and scripting.
• Gate-Level verification.
• Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.

Qualifications: 

• Bachelor/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• Has the ability to follow instructions/tasks according to design specifications/procedures.
• Basic knowledge of ASIC development process and digital design techniques. 
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge of standard DV languages (SystemVerilog, UVM) and in behavioral/RTL coding. 
• Executing tasks that hit project milestone. 
• Knowledge/Experience with the following is a plus: 
• Embedded designs and/or firmware development
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• Scripting and automation languages like TCL, Phyton and C/C++. 

Location: 

Barcelona, Spain

Job Summary:

As a Jr digital design engineer, the candidate will work closely with senior member for success in digital design & verification/infrastructure development for digital FPGAs/ASICs with embedded microcontrollers. Other key skills include documentation, RTL design knowledge, and general backend flow and tools knowledge. Candidate will be contribute to support/design, verify, and be technical focus on one or more device and/or sub-sections.  Candidate will also support pre/post-silicon design validation and Design/ATE/Application & Systems group

MPS products includes switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, motor control, audio, digital camera, automobile and network equipment.

Essential Functions/Responsibilities:

• Works closely under the supervision of Senior members of IC/AE team.
• Contributes to the design, development, & verification of embedded digital / mixed-signal IC’s
• Assist to support/design/verify the chip or sub-system level micro architecture and functional blocks
• Support technical documentation with specifications, block diagrams, and requirements to stakeholders.
• Collaborate with software team to develop software/firmware applications.
• Collaborate to support different departments/stakeholders including for processor architectures, requirements, and tradeoffs, including Digital/Analog Design, software/firmware engineering, Application/Test Engineering, & Reliability/Operations to resolve design, application, or test issues.
• Perform RTL design/verification.
• Assist to design, integrate and verify IP blocks
• Development of company documentation and intellectual property

Qualifications

• PhD or MS in Electrical Engineering with emphasis digital design/VLSI coursework and/or 1+ years of experience
• Has the ability to follow instructions/tasks according to design specifications / procedures
• General knowledge with uC architecture (ARM), bus structures, memory controller and MCU peripherals.
• Experience using communication protocols such as UART, I2C, SPI and USB.

• Proficient with standard DV languages(Verilog/SysVerilog/UVM)

• Solid English written, verbal, & communication/collaboration skills

• Knowledge/Experience with the following is plus:
• knowledge of power management industry/applications
• I2C, SPI, USB, PMBUS
• Programming & Scripting languages: Perl/Python/TCL/C/C++
•  

Location: Barcelona, Spain 

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. Candidate will be expected to lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will also be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 

• Digital Verification: Development test plans, test benches and automated test cases
• Knowledge and/or responsibility in synthesis, timing closure, and formal verification.
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 5+ years experience in design plus verification of ASIC or FPGA
• Strong knowledge of ASIC development process and digital design techniques
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 

• Experience with the following is desired:
• Embedded designs and/or firmware development
• Automotive FuSA and ASIL Standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• GITLab 

Location:

Barcelona, Spain 

Job Summary:

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators and controllers, battery chargers and monitors, motor control drivers, LED drivers, audio amplifiers, hot-swap switches, and PMIC SoC for fast-growing portable and non-portable markets such as artificial intelligence, electric vehicles, Internet-of-Things, smartphones, servers, computers, medical and robotics. 

Essential Functions:

• Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulations, layout supervision
• Perform PVT corners and Monte-Carlo analysis, top level AMS simulations, and post layout parasitic analysis
• Participates in the entire product development cycle, from product definition through product release
• Assists ATE development with Design-For-Test methods
• Oversees and mentors junior engineers
• Provide technical leadership. Architect new product platforms

Required skills:

• Understand switched-mode power design techniques
• Understand power conversion architectures such as buck, boost and etc.
• Understand analog and mixed signal circuits including amplifies, bandgap, data converters and etc.
• Understand power converters control schemes as such voltage mode, current mode and etc.
• Understand analog layout techniques 
• Understand general IC qualification requirement

Qualifications:

• BSEE / MSEE with 10+ years of Semiconductor and/or Analog circuit design experience
• Good verbal and written skills

Location: San Jose, CA, Kirkland, WA, North Carolina, Florida, or Chandler, AZ

技术市场/应用工程师-广州

定义及调试模拟芯片产品，开发参考电路，撰写相关技术文档，对市场人员提供技术支持及培训。

工作职责

职位要求：

POSITION OVERVIEW

Monolithic Power Systems (MPS) is an S&P 500 global power and analog semiconductor company (NASDAQ:MPWR). Our automotive business is growing rapidly, and we are now looking for a driven, creative and energetic Product Marketing Manager to join our team. As a Product Marketing Manager reporting directly to the Director of Marketing, Automotive, you will drive global marketing activities and craft our overall roadmap strategy as we develop tomorrow’s cutting-edge power management and precision analog solutions. You will travel the world to meet with customers and field colleagues to build relationships, develop a keen intuition for the market, and drive design wins. You will use your exceptional verbal and written communication skills to tell the world how MPS can offer customers incredible power management solutions that help them accomplish more with less. Domestic and international travel may be required.

JOB FUNCTIONS 

• Collaborate with technical marketing team during product definition process to translate customers technical concerns into compelling new products 
• Perform competition analysis to understand relative strengths and weaknesses 
• Keep abreast of automotive market trends to inform roadmap and marketing strategy
• Help drive product line goals through effective product definition, positioning, promotion and pricing strategies 
• Manage product lifecycle and business activities including go to market plans, roadmap, product change notification
• Produce compelling customer collateral for new product introductions and digital marketing activities 
• Revenue forecasting and design win/in engagements with regional sales teams
• Face-to-face interaction with customers for product definition, roadmap promotion, market understanding and relationship management
• Product internal training material to present to field sales and application engineers 
• Develop and maintain deep understanding of automotive and industrial applications 
• Work closely with engineering team including design, product, test and application engineers throughout product development process to ensure strong execution to plan
• Work with planning and operations teams to ensure production WIP (work in progress) properly anticipates customer forecast 
• Author articles for publication in trade magazines and journals, application notes and whitepapers
• Occasional domestic and international travel (10-20% of the time)

EXPERIENCE REQUIREMENTS 

• 2+ years work experience in IC product development, hardware engineering or automotive electronics
• Good understanding of semiconductors and how they are made
• Experience in product marketing or business development a plus 
• Automotive experience a plus
• Excellent verbal and written communication skills 
• Ability to collaborate effectively with people in different functions and across regions
• Strong time management skills 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering or a related field

LOCATION 

• San Jose, CA 
• Livonia, MI 
• Munich, Germany 
• Barcelona, SP

This is a Manager level position in application/System Engineering. Responsibilities include leading a project team to define and debug analog IC products, to develop reference circuits, writing datasheets and application/design notes, and to provide application support and technical training.  

• Lead the team to work with Design Engineers, Field Applications team, and Marketing to define and debug analog IC products in DC/DC converters. Prior experience in designing and defining these products are highly desired.
• Oversee the development of application reference circuits and system level power management solutions for computing and networking markets.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products. 
• Provide application support and technical training for key customers and field application engineers

Qualifications:

• 10+ years of hand-on experience in switch mode power supplies
• Previous experience in a power supply manufacturer or power management IC company desired
• Previous experience in the memory market (like solid state drive, DIMM) preferred
• Fluent communication skills in English
• Excellent writing and presentation skills
• Self-motivated
• Good planning capability
• MSEE or higher required

Locations: 

• San Jose, CA or Chandler, AZ preferred

The Facilities Maintenance Technicians position is responsible for overseeing the general upkeep of Monolithic Power Systems building and its infrastructure. Their role is to maintain building operations and ensure that the facilities are safe and functional at all times. The Facilities Maintenance Technician will be responsible for performing routine building maintenance tasks in the general fields such as HVAC, electrical, ventilation, plumbing, etc. They also manage emergency repairs to prevent and resolve safety or comfort issues. Maintenance technicians install new equipment and oversee building upgrades to maintain and preserve the facility and the building grounds.

Primary Responsibilities:

• Maintaining HVAC, plumbing and electrical systems throughput building.
• Performing routine maintenance around the building.
• Coordinate any outsourced maintenance and repair activities.
• Complete daily facilities requests (repairs/Handy-Man work) in timely fashion with little or no supervision.
• Review and recommend Facilities Maintenance contracts.
• Checking and responding to security and safety issues.
• Off-hours emergency response.
• Applying preventative measures to the building to reduce the risk of future problems.
• Fixing potential safety hazards to avoid injuries.
• Overseeing landscape maintenance and pest control.
• Maintaining and monitoring security camera system.
• Coordinating deliveries from vendors and suppliers.
• Keeping documents of inspections and problems.
• Scheduling major repairs with the building’s inhabitants and HR.
• Provide weekly status updates for ongoing activities.

Desired Skills:

• Experience trouble shooting and repairing HVAC systems.
• Construction skills such as carpentry, painting, plumbing, and welding.
• Advanced critical thinking and problem-solving skills for fixing maintenance issues.
• Administrative skills for ordering supplies, handling records and scheduling maintenance.
• Physical strength and dexterity to lift, move and handle equipment.
• Basic computer skills (i.e. Excel, Word, PowerPoint, etc.).
• Strong verbal and written communication for discussing maintenance issues.
• Organizational and time management skills.
• Interpersonal skills to interact with employees of the building in a pleasant manner.

Qualifications:

• AS in a technical or science discipline preferred, or related experience.
• 5+ years experience preferred in commercial facilities maintenance, or equivalent experience.
• Strong organizational and excellent communication skills are required. 

Job Summary:

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators and controllers, battery chargers and monitors, motor control drivers, LED drivers, audio amplifiers, hot-swap switches, and PMIC SoC for fast-growing portable and non-portable markets such as artificial intelligence, electric vehicles, Internet-of-Things, smartphones, servers, computers, medical and robotics. 

Essential Functions:

•  Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulations, layout supervision
• Perform PVT corners and Monte-Carlo analysis, top level AMS simulations, and post layout parasitic analysis
• Participates in the entire product development cycle, from product definition through product release
• Assists ATE development with Design-For-Test methods
• Oversees and mentors junior engineers

Required skills:

• Understand switched-mode power design techniques
• Understand power conversion architectures such as buck, boost and etc.
• Understand analog and mixed signal circuits including amplifies, bandgap, data converters and etc.
• Understand power converters control schemes as such voltage mode, current mode and etc.
• Understand analog layout techniques 
• Understand general IC qualification requirements

Qualifications:

• BSEE / MSEE with 2 + years of Semiconductor and/or Analog circuit design experience
• Good verbal and written skill

Location: San Jose, CA, Kirkland, WA, North Carolina, Florida, or Chandler, AZ

Job Summary:

• This position will provide technical support to China mainland customers with R&D centers in Taiwan.   
• The FAE identifies and shares current and emerging customer technical needs to improve the tactical and strategic product positioning.

Essential Functions:

• Technical support on all customer related products, mostly computing area. 
• Conduct product presentation and training to customers.
• Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues. 
• Deliver and communicate with Application Engineer and Marketing about customers' issues and information in order to solve the issues quickly. 
• Provide the information including but not limited to market trends, competence analysis, and new product definition to Marketing Manager.

Qualifications:

• At least 3 years’ experience in power electronics (DC/DC or AC/DC) related industry; experience in Power IC vendor as AE or FAE will be a plus. 
• Familiar with general NB/Server DCDC Power Design or DCDC will be a plus.
• Experience with motor driver will be a plus.
• Strong technical knowledge of power electronics.
• Ability of initiating and problem solving. 
• Good interpersonal skills. 
• Adaptability- ability to meet changed condition. 
• Strong sense of responsibility, self-motivated and good team spirit. 

Requirements:

• Strong CPU core power design experience and knowledge is highly preferred.
• Good English (both written and spoken).

Education:

•  BS or MS majored in Electronic Engineering or related

Location:

•  TAPEI, TAIWAN

Job Summary:

This person will be the primary technical support contact for MPS Key- Accounts in South-West Germany (industrial and automotive accounts). The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs for new IC product developments. 

Essential Functions:

• Contribute to MPS EU Revenue growth through direct and in-direct technical activities.
• Provides technical support to customers to meet or improve customer’s requirements with MPS products and technical knowledge.
• Support customers across multiple markets and territories when technical issue rising 
• Provide field service and hands-on troubleshooting at customer site if requested
• Identify and develop new business opportunities to grow MPS business at defined Key Customers
• Gather potential market moves and competitor’s activities for MPS product strategy.
• Establishing and maintaining customer relationships

Qualifications:

BS or MS of Electronics or Electrical Engineering.

Several years hardware design experience, ideally including power supply solutions or work as FAE with focus on power supplies.  

Excellent communication / interpersonal skills

Oral /written proficiency in English and German

Locations:

Germany, South-West

Application Engineer (m/f/d)

POSITION OVERVIEW

Monolithic Power Systems (MPS) is a global power management semiconductor company that is growing rapidly in the European market. Our strong product portfolio leverages proprietary, state-of-the art, silicon processes. To strength our team, we are seeking an Application Engineer at our new location in Ettenheim (D-77955), Germany. You will focus on solving customers’ challenges and doing our part to ensure a sustainable/greener tomorrow.

JOB FUNCTIONS

As an Application Engineer, you will be focused on developing innovative reference designs, testing the latest products of MPS, and generating collateral such as datasheets/application notes/ISO26262 documentation, as well as providing application customer support. This is a fantastic opportunity where your success is only limited by your creativity. Some of your responsibilities will include, but will not be limited to:

• Provide onsite support for key customers' design and testing.
• Work with design engineers, field applications team, and marketing to enhance and debug analog IC (Integrated Circuit) products.
• Design evaluation boards, to deliver a fully testable solution to MPS’s clients.
• Write technical articles, datasheets, and application notes to support client and MPS’s sales team
• Provide application support for key customers and field application engineers

QUALIFICATIONS

• Degree in related engineering field + 2-3 years of industry experience in electronics
• Solid understanding of power electronics circuits
• Experience with PCB design
• A good knowledge of EMC measures and tests will be a plus.
• Oral / written proficiency in English
• Excellent communication, interpersonal and organizational skills

You will work for us in a motivated team and constantly growing technology companies. Take the initiative and send us your meaningful and complete application. We look forward to seeing you!

PCB Applications Engineer (m/f/d)

POSITION OVERVIEW

Monolithic Power Systems (MPS) is a global power management semiconductor company that is growing rapidly in the European market. Our strong product portfolio leverages proprietary, state-of-the art, silicon processes. To strength our team, we are seeking for an Engineer at our new location in Ettenheim (D-77955), Germany. You will be instrumental to expanding our testing services and will have the opportunity to collaborate with worldwide teams.

JOB FUNCTIONS

As a PCB Applications Engineer you will develop PCBs for different applications ranging from high power applications to automotive solutions. You will support the local team and become the “go-to” person for PCB designs. Some of your responsibilities will include, but will not be limited to:

• Develop Printed Circuit Boards (PCBs) targeting a broad range of industrial and automotive solutions.
• Generate layouts based on circuit diagrams, component lists, physical constrains and normative specifications, assembly techniques and industrialization rules.
• Collaborate with the application engineering team to fulfil key objectives such as power density, EMC compliance or cost.
• Responsible for technical supplier management (board shops, component vendors and assembly partners).
• Maintain project hardware designs and component (including 3D models) libraries.

REQUIREMENTS 

• State-certified technician (m/f/d) or degree in electrical engineering, mechatronics, or a comparable qualification with corresponding professional experience.
• Good understanding of electrical schematics, layouts, and digital/analog components.
• Initial experiences with analog circuits (e.g. op-amps, DC/DC converter, motor driver, data converters, sensors, etc.)

QUALIFICATIONS

• Solid understanding and experience in PCB design (IPC design rules).
• Experience with Altium or similar E-CAD design tool.
• Initial experience in analog design and laboratory test equipment (power-supplies, oscilloscopes, multimeters etc.…).
• Good verbal and written communication skills.
• Ability to work in teams and collaborate effectively with people in different functions.

You will work for us in a motivated team and constantly growing technology companies. Take the initiative and send us your meaningful and complete application. We look forward to seeing you!

We are looking for a highly skilled Senior software engineer who can take initiative and build solutions for products that are used 24x7.

• Develop solutions to integrate and deploy custom algorithms to thousands of devices in client locations
• Develop automatic updater/installer for windows based applications
• Develop software for automating IOT device configuration and installation
• Develop networking solutions to securely manage devices remotely
• Develop code to capture issues when customers are using our products and send us a detailed bug report with all the necessary information
• Write code to collect and transfer large image/video data.
• Develop solutions using software and hardware interfacing protocols like Bluetooth 5.0, Wifi, Ethernet TCP/IP MQTT, HDMI-CEC, webRTC, etc., to connect, control and transfer data with external devices
• Implement APIs and protocols to interface between IOT devices and cloud servers
• Develop solutions to use GPU devices for accelerating CV/DL algorithms
• Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code
• Keep up-to-date and follow the latest trends in software and security standards

Job Requirements: 

• Minimum 3 years experience in hands-on Software Development
• Strong programming skills in C++
• Experience with networking and communication protocols
• Experience working in an agile environment
• Experience with mission critical, 24x7 IOT systems
• Familiarity of web development technologies
• Familiarity with various video and image encoding and encryption techniques
• Experience in communicating with users, other technical teams and management to collect requirements, identify tasks, provide estimates and meet production deadlines
• Attention to detail, working through all the edge cases and focusing on building a highly reliable, secure and available systems

Job Summary

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include, switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, network equipment, and automotive.

 Requirement

•  Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision
• Participates in the entire product development cycle, from product definition through product release.

 Qualifications:

•  MSEE / PhD of electronic engineering, analog or digital IC design topics
• For analog, familiar to power converter (buck/boost/buck-boost/LDO) analog design will be the plus
• Self-motivated, could have strong team work/collaboration with overseas colleges.

 Location

•  Taipei, Taiwan

Job Summary: 

A Mixed-Signal Design Engineer assists on the Analog Design and Analog-Digital interface definition, design, validation, verification and integration of mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Analog and Mixed-Signal design.
• Analog-Digital Interface Definition and Documentation.
• Behavioral Modelling of Analog Blocks. Analysis to verify architectural choices and trade-offs
• Validation and Verification of the Analog and Mixed-Signal.
• Analog IP Definition, Development, Integration and Verification.
• Analog Mixed-Signal simulations and debugging.
• Assist the Digital Design Team with Timing, Input/Outputs and DFT Constraints.
• Post-Silicon Validation and Characterization support.
• Close interaction and collaboration with Analog Design, Analog Layout, Digital Design Engineers, Digital Verification and Digital Physical Engineers.

Qualifications: 

• BSEE + 5 years of experience, MSEE + 2 year of experience in digital mixed-signal ASIC design. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development and Silicon fabrication process.
• Strong background in transistor level and analog/mixed circuit design.
• Understanding of device mismatch, noise, linearity and other analog effects.
• Experience in Layout design and knowledge of best-practice techniques.

• Strong experience with simulation tools such as spectre, hspice, and MATLAB. 
• Proficient with Cadence circuit design tools like ADE-L and ADE-XL. 
• Understanding and experience in running complex simulations such as Monte-Carlo, noise simulations and stability analysis.
• Experience running DRC and LVS using Calibre, ICV, etc.
• Experience running Verilog-AMS mixed-mode simulations.

• Verilog, System Verilog and Verilog-A coding skills for behavioral modelling. 
• Knowledge of DFT Techniques such as SCAN, LBIST, ABIST and IDDQ.
• Knowledge of STA and Mixed-Signal Timing and Input/Output Constraints for Syn and P&R.
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 
• Automotive and ASIL Standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• Scripting and automation languages like Skill, TCL and Phyton

Location: 

Barcelona, Spain   

Sr. Technical Marketing Engineer (LED Driver, US, Europe)

Job Summary:

This is a senior level position in the standard analog product line responsible for the product definition, system application, and technical marketing activities in LED drives. 

 Essential Functions:

- Define LED driver, LCD bias, and OLED driver products

- Supervise applications engineers on product evaluation. 

- Engage with key customers to promote motor driver products and solutions 

- Write data sheets, application notes, and white papers

- Train FAEs on MPS LED driver solutions

 Qualifications:

- Master degree in Electrical Engineering with a minimum of 5 years application/system engineering experience in analog semiconductor companies or R&D experience in motor companies

- Extensive knowledge and experience of LED driver for backlight and lighting in automotive applications 

- Experience in automotive industry is preferred

- Excellent communication and presentation skills

Requirements:

• Able to travel up to 25% of time

Education:

• Master of Electrical Engineering (PhD preferred)

Location: San Jose, CA, Kirkland, WA, Detroit, MI OR, Germany, Ettenheim, Spain or Italy

Customer Service Representative

Job Summary: 

• Daily order process 

• Daily Sample order process 

• Backlog review 

• Shipment schedule monitor to make on time delivery 

• Shipment tracking 

• Communicate / Working with factory and distributions to deal with any issue 

• Support regular reports – Billing, POS, Inventory, Backlog, RFQ, Sales forecast. 

• Systems support and customer complains / RMA.  

Essential Functions: 

• Good Excel skill and data tracking capability Requirements: 

• At least 1 year work experience in related field 

• Good communication skill in English writing and reading

Education: 

• Bachelor degree preferred 

Job Duties: 

Engage with key customers and secure design wins incorporating MPS Power Management ICs through extensive knowledge of DC/DC and multiphase power supply design and Power IC architectures. 

Defining and share current and emerging customer technical needs to improve tactical and strategic product positioning. 

Perform schematic and layout reviews, board validation through bench testing, including debug and rework using oscilloscopes, power supplies, electronic loads, network/logic analyzers, soldering tools; test automation script development with programming languages: Labview, Python, C/C++, & Visual basic.

Job Requirements:   Master's degree in Electrical Engineering and 3-year experience in the offered position, or as Lead Applications Engineer.

Job Site: Kirkland, WA

Development Operations Engineer

Overview:

The IT DevOps Engineer, will join a dynamic and growing Global IT organization located in Kirkland, Washington with global support responsibilities particularly in Europe. Located in Barcelona, Spain, the IT DevOps Engineer will be responsible to carry out automation and optimization tasks to better upkeep all IT Infrastructure systems and services both in-house and in cloud.

Job Responsibilities:

• Working with configuration tools in Linux - Terraform, Ansible to implement monitoring, alerting and reporting in the hybrid cloud infrastructure to upkeep and improve IT Infrastructure robustness and performance.  
• Constantly evaluate new IT Infrastructure automation and monitoring tools to help adopt the right ones to better manage the production services and meet the IT Infrastructure SLA requirements
• Maintain and improve code analysis, build, documentation, and release tools
• Closely work with IT System Engineers for Servers, Network, Storage and IT Security Engineers, to identify, plan, execute and manage IT Infrastructure Automation tasks well. 
• Integrate code analysis and quality metrics tools to provide unified and timely monitoring and alerts on IT Infrastructure performance to related IT staff. 
• Customize our continuous integration system to work with a growing team
• Improve integration between version control, build and incident tracking tools
• Collaborate with the team to improve overall build process reliability and scalability
• Upgrade, maintain current production deployment systems
• Provide ongoing support, needed documentation for the code development lifecycle
• Solve complex technical issues involving multiple technology stacks

Qualifications:

• Proficient with Git, continuous integration, and multiplatform development environments, strong knowledge of secure source control management
• Familiar with static analysis and code coverage tools
• Dedicated to optimizing full cycle engineering development pipelines
• 2+ years of Azure experience
• 5+ years of experience in developing and maintaining build tools and processes for engineering teams of 15 or more, preferably in IT Infrastructure automation and support environment.
• Experience with developing, operating, and maintaining critical workloads
• Experience with IT Infrastructure systems in Servers, Network and Storage systems and cloud technologies, cloud infrastructure and applications
• Experience with infrastructure-as-code methods and technologies
• Experience with compute including server, container, and serverless
• Experience with CI/CD and other automation
• Experience collaborating across multiple functions and teams
• Bachelor’s degree or above in Computer Science or related field

Location: Barcelona, Spain

Basic Purpose of the Position:

Support and maintain users PC, and other IT infrastructure systems and services.

Key Responsibilities:

• Manage and setup IT system access and security configurations.
• Support and maintain client compute environment for optimal performance.
• Support and maintain cloud compute accessibility.
• Manage and enforce user PC settings to comply with IT policies.
• Provide user training at appropriate level.
• Complete and/or escalate user helpdesk requests timely for efficient resolution.
• Complete tasks assignment from superior.

Education:

Computer Science or Engineering, Information Technology, Information management, etc.

Length of Experience:

3-4 years

Required Skills:

• Good knowledge of Windows Operating Systems; 
• Good knowledge of Office365;  
• Knowledge of Active Directory, DHCP, DNS, NPS/NAP;
• Knowledge of networking, subnet, and Internet access control;
• Knowledge of cloud compute preferred with MS Azure;
• Knowledge of ISO/IEC 27001:2013 and CIS;
• Good personality and skillful communication (English, Chinese)

Job Summary:

 As a Senior Design Engineer, you will design analog mixed-signal power management products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products may include battery chargers, precision battery pack monitors/protectors, and fuel gauges. This position will give you the opportunity to help define, design, and successfully release battery management products that are used in a wide range of portable devices and e-mobility markets. Battery management is a rapidly growing product line at MPS and this is an opportunity to be a key player in our success. Responsibilities:

• Design analog and mixed-signal blocks and chip top level
• Comprehensive simulation coverage of all circuits designed
• Contribute to product definition, specification review, feasibility, and architecture
• Assist with design schedule and die size estimation
• Optimize circuit size and performance
• Support post-silicon validation and debug

Qualifications:

• BSEE required, MSEE or PhD preferred
• 5+ years of experience in analog/mixed-signal design within an analog power management or battery management semiconductor company
• Comprehensive understanding of power conversion architectures such as buck, boost, buck-boost, etc.
• Experience designing battery charger ICs with multiple control loops or multi-cell battery monitor/protection ICs with precision ADCs
• Experience with low Iq design techniques required for battery powered devices
• Understanding of analog and mixed signal circuits including amplifies, bandgap, data converters and etc.
• Understanding of analog layout techniques
• Understanding of modelling in Verilog A/AMS/System Verilog
• Good verbal and written communication skills

 Preferred Locations:

USA

• San Jose, CA
• Kirkland, WA
• Phoenix, AZ
• Raleigh, NC

Europe

• Barcelona, Spain
• Milan, Italy
• Budapest, Hungary
• UK
• Austria

Attribute on digital verification development for all MPS power management products, including mixed-signal IC products, SOC/MCU products, VIPs and other verification related works.

对MPS所有的电源管理产品的数字相关设计提供验证开发工作，包括混合IC产品，SOC/MCU产品，验证VIP开发，以及其他验证相关工作。

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

MPS 产品包括：开关稳压器、传感器、电机控制、显示驱动器、音频放大器和电源管理 IC，适用于笔记本电脑、手机、电信、数码相机、汽车和网络设备等快速增长的便携式和非便携式市场。

RESPONSIBILITIES:

REQUIREMENTS:

Physical Design Engineer will be part of design development team. The candidate will work on the digital design implementation, and verification of mixed-signal ICs utilizing standard asic tools. Products to be designed/verified include, power management, and mixed signal functions. 

物理设计工程师将成为设计开发团队的一部分。 候选人将致力于数字设计实施，并利用标准 asic 工具验证混合信号 IC。 要设计/验证的产品包括电源管理和混合信号功能。

MPS products include : switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

MPS 产品包括：开关稳压器、传感器、电机控制、显示驱动器、音频放大器和电源管理 IC，适用于笔记本电脑、手机、电信、数码相机、汽车和网络设备等快速增长的便携式和非便携式市场。

RESPONSIBILITIES:

REQUIREMENTS:

需要电气工程/计算机科学或以上学历的学位;

两年以上数字后端工作经验；

良好的英语书面/口头沟通能力和较强的团队合作/协作能力；

能够独立工作，按照设计规范执行指令，执行任务以高质量完成里程碑；

熟悉ASIC开发流程和数字设计技术；

熟悉Perl/TCL/Unix/Python等编程、脚本和自动化语言；

       7.Strong technical abilities & understanding in these areas:

在这些领域有很强的���术能力和理解力：

Verilog/SysVerilog coding.

Synthesis, CTS, DFT, Extraction, and STA closure across multiple process corners.

Multipower domain, signal integrity, & power/IR drop analysis

Linting and CDC requirements.

Expertise in both hand-written and tool-driven functional/timing ECO.

Physical Design Verification methodology to debug LVS/DRC issues at chip/block level

Power user of industry physical tools: Cadence Encounter/Innovus tools(preferred) or Synopsys ICC/ICC2

      8.Experience with the following is desired:

有以下经验者优先：

Physical SOC design including SOC design(ARM/RISCV)

knowledge of power management industry/applications

I/F: I2C, SPI, USB, PMBUS, etc

Attribute on digital circuit design for all MPS power management products, including mixed-signal IC products, SOC/MCU products ,IPs and other design related works.

对MPS所有的电源管理产品的数字部分提供数字设计开发工作，包括混合IC产品，SOC/MCU产品，IP开发，以及其他设计相关工作。

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

MPS 产品包括：开关稳压器、传感器、电机控制、显示驱动器、音频放大器和电源管理 IC，适用于笔记本电脑、手机、电信、数码相机、汽车和网络设备等快速增长的便携式和非便携式市场。

RESPONSIBILITIES:

REQUIREMENTS:

Sr. Software Engineer 

MPS ships billions of products a year that are used in everything from consumer electronics and IoT (Internet of Things) to laptops and cars. We are transforming power electronics design for electrical vehicles, robots, large battery package, data centers, automotive and industrial applications with memory-based programmable plug-in-play products. We are looking for a senior software developer who is passionate about   creating configuration software for programmable electronic parts. The person will work with World-leading eCommerce experts and system developers in MPS Seattle and San Jose offices.

Responsibilities:

• Work with a team of software engineers to design and build Windows applications that allow MPS customers to interface with our programmable products.
• Work with Product Application Engineers to collect, understand and document software requirements.
• Work with QA engineers to define test plans and setup automated tests as needed.
• Maintain and enhance existing C# code bases
• Use JIRA and SCRUM process to manage projects and track progress.
• Participate in scoping and planning works.

 Requirements

• Familiar with MS Windows development environments, using Visual Studio and C#.
• Familiar with WPF, MVVM, .NET, MVC, LINQ.
• Keeping track of changes made to code with GitHub and Git version control system.
• Working knowledge of XML and related technologies.
• Good communication skills. Fluent in English and Mandarin.
• Good team player.
• Experience of software development at least 4+ years.

 Good to have:

• Familiar with Firmware libraries a plus
• RESTful API knowledge
• Electrical Engineering background or related experience is a big plus.

 Education: Master's degree (or foreign equivalent) in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, or a related field.

Software QA Engineer

MPS ships billions of products a year that are used in everything from consumer electronics and IoT (Internet of Things) to laptops and cars. We are transforming power electronics design for electrical vehicles, robots, large battery package, data centers, automotive and industrial applications with memory-based programmable plug-in-play products. We are looking for a senior software developer who is passionate about   quality control on configuration software for programmable electronic parts. The person will work with World-leading eCommerce experts and system developers in MPS Seattle and San Jose offices.

Responsibilities:

• Work with a team of software engineers to QA Windows applications that allow MPS customers to interface with our programmable products.
• Work with Product Application Engineers to collect, understand and document software requirements.
• Define test plans, develop/execute testcases and setup automated tests as needed. 

Requirements:

• Experience as a software test engineer debugging and triaging complex desktop applications.
• Excellent communication skills, both verbal and written.
• Must be fluent in Mandarin to work closely with Software and Hardware Engineers.
• Customer-focused, organized, thorough and meticulous.
• Good team player.
• Experience with C# or other scripting languages a plus.

Good to have:

• Experience as a software test engineer debugging and triaging web applications
• Experience with test automation frameworks for Windows and/or web applications
• Familiar with Agile software development, using JIRA project management tool and SCRUM process.
• Good English communication, writing, and presentation skills.
• Electrical Engineering background or related experience is a big plus.

Education: Bachelor’s degree or higher in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, or a related field.

Summary:

This position is set to support MPS new MCU related product development, validation and test, provide technical support for customer and take care of product related technical document.

此职位设置的目的是支持MCU相关新产品的开发，验证测试，为客户提供应用方面的技术支持和负责公司的产品规格书及应用文档

RESPONSIBILITIES:

1       跟IC设计工程师，现场应用团队合作，定义并调试MCU IC；

2      评估新的MCU产品并撰写测试报告；

3      设计应用参考线路图；

4      撰写产品规格书，应用设计手册；

5      向现场应用工程师及主要客户提供技术支持和技术培训。

REQUIREMENTS:

1      具备扎实的单片机硬件知识，熟悉各种外设的内部工作原理，熟悉各种���设接口的驱动，精通单片机软件知识；具备单片机相关的工作经验3年以上；

2      熟悉各种MCU,ARM开发环境，有过丰富的项目经验的优先，能独立做项目。做过实际的单片机芯片开发，验证***。

3      电子、通讯、控制硕士及等效学历;

4      具备分析复杂的模拟电路，基本数字电路及电力电子线路的能力；

5      良好的沟通，撰写及做报告的能力；

6      良好的英语沟通能力；

MPS ships billions of products a year that are used in everything from consumer electronics and IoT (Internet of Things) to laptops and cars. We are transforming power electronics design for electrical vehicles, robots, large battery package, data centers, automotive and industrial applications with memory-based programmable plug-in-play products. We are looking for a junior software developer who is passionate about   creating configuration software for programmable electronic parts. The person will work with World-leading eCommerce experts and system developers in MPS Seattle and San Jose offices.

Responsibilities:

• Work with a team of software engineers to design and build Windows applications that allow MPS customers to interface with our programmable products.
• Work with Product Application Engineers to collect, understand and document software requirements.
• Work with QA engineers to define test plans and setup automated tests as needed.
• Maintain and enhance existing C# code bases.

Requirements:

• Familiar with developing Windows Desktop applications using Visual Studio and C#.
• Familiar with .NET, MVC, LINQ a plus.
• Familiar with Firmware libraries a plus.
• Good team player.

Good to have:

• Familiar with Agile software development, using JIRA project management tool and SCRUM process
• Good English communication, writing, and presentation skills
• XML and related technologies. 

Education: Bachelor’s degree or higher in Electrical Engineering, Computer Engineering, Computer Science, Software Engineering, or a related field.

Job Summary:

MPS is seeking a Senior System Solution Integration Engineer. This role is responsible for the definition and development of power systems that may involve networking and connectivity for power storage, generation and distribution for applications, such as commercial/industrial and home automation, RV, trucks, yachts, boats.  You will work closely with customers, sales channels, field teams, internal product line teams, and marketing teams to define and develop such power system.  

• Define the key application and spec for the total power solution in the system level
• Drive the cross-functional collaboration with the mechanical, package, test, product and QA team to bring the system solution from concept to mass production
• Validate and characterize new products
• Provide technical support and training for customers and field application engineer

 Qualifications:

• BS or MS in Electrical/Electrical Engineering
• Highly enthusiastic in electronics, system design and hands-on capability.
• 3+ years of hands-on experience in targeted applications/markets (power system designs and hardware designs that involve networking/connectivity for commercial/industrial building automation, RVs, utility trucks, yachts, boats,)
• Familiar with power storage, generation and distribution systems requirements, specs, standards, regulations
• Effective priority management skills across multiple tasks
• Excellent verbal, written and presentation communication skills

Location:

San Jose, CA; Kirkland, WA

MPS Asia

Solution Marketing Manager (SMM)

 Job Summary:

 MPS is seeking a self-motivated and well-rounded individual who will work closely with our system engineering teams across the company to further drive and promote MPS’ strong product fit as system solutions. You are expected to have a good understanding of the power systems that may involve networking, connectivity, Power over Ethernet power (PoE) delivery and control, power storage, generation, and distribution, targeting applications, such as commercial/industrial building automation, microgrids, charging stations, and RVs, utility trucks, yachts, boats, etc. You will partner closely with customers, sales channels, field teams, internal product line teams, and marketing teams to come up with power system promotion, all the needed collateral, including presentations, system solution flyers, and promotion platform, including MPS’ and partner’s websites.  This role includes strategic involvement with product lines and management teams to come up with solution ideas and solution positioning to drive new business opportunities and design-in/design win activity management. It also includes performing market and competitive analysis, pricing strategy, opportunity projections, and forecasting.

 Essential Functions:

• Customer interface/visits
• Solution marketing and promotion strategy
• Driving and strategizing new business opportunities
• Work with various sales channels to close design-ins/wins
• Market/Competitive analysis
• Pricings
• Opportunity projections
• Forecasting
• Troubleshooting issues and problems
• Q & A from the field and customers

Qualifications:

•  Over 3 years of experience in targeted applications/markets (commercial building automation, RVs, utility trucks, yachts, boats)
• Strong relationships with existing customers in these markets
• Excellent verbal and written communication skills
• Ability to thrive in an extremely fast-paced, start-up environment.
• BSEE or equivalent required

Location:

Kirkland/San Jose, Washington 

Jr. Digital Engineer Interns positions for Design, Verification, Physical and Mixed-Signal Design.

 Job Summary: 

A Jr. Digital Engineer Intern assists to and learn from Senior Engineers in the design, verification, modelling, development, integration and physical implementation of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed may include power management, signal management and mixed signal functions.

 MPS is looking for just graduated students or a final-year student looking for a thesis or Professional Experience sponsorship.

 The essential functions will vary depending on the desired Job Position.

 MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

 Digital Design Essential Functions: 

• Contributes to the design, development, & verification of digital / mixed-signal IC’s. 
• RTL Digital Design using Verilog and/or SystemVerilog
• Behavioral modeling, and Digital Verification using standard DV languages (SystemVerilog, UVM).
• Synthesis and DFT

Digital Verification Essential Functions: 

• Assist in the creation of Digital Verification environments with UVM and SystemVerilog.
• Write Digital and Mixed-Signal testcases and assertions/checkers.
• Analyze and debug test results, code coverage and functional coverage. 
• Support on Verification IPs and standard tests, environments, checkers, etc.
• Assist with Test Plan generation based on design requirements and product datasheets of digital / mixed-signal IC’s.
• Gate-Level verification

Digital Physical Design Essential Functions:

• Contribute to the design, development, & physical implementation of digital / mixed-signal IC’s. 
• Development and Review of Synthesis and P&R SDC Constraints. 
• Synthesis, P&R and Logical Equivalent Check Flows.
• Power and IR Drop Analysis.
• DFT Implementation and Metrics Analysis.
• Close collaboration with the CAD and Technology Development Groups.

Mixed-Signal Design Essential Functions: 

• Assist with the creation of Mixed-Signal Verification environments
• Write Mixed-Signal testcases and assertions/checkers.
• Analyze and debug test results, code coverage and functional coverage. 
• Assist with Mixed-Signal Test Plan and Modelling Plan generation based on design requirements and product datasheets of digital / mixed-signal IC’s.
• Analog-Digital Interface Definition and Documentation.
• Behavioral Modelling of Analog Blocks. Analysis to verify architectural choices and trade-offs
• Analog and Digital Mixed-Signal Validation, Verification, simulations and debugging. 

Common Essential Functions: 

• Documentation
• Close interaction with Senior Digital Design, Digital Verification and Analog Design Engineers
• Automation and scripting.

Qualifications: 

• Bachelor/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework.
• Has the ability to follow instructions/tasks according to design specifications/procedures.
• Basic knowledge of ASIC development process and digital design techniques. 
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge of standard DV languages (SystemVerilog, UVM) and behavioral/RTL coding.
• Executing tasks that hit project milestone. 
• Knowledge/Experience with the following is a plus: 
• SCAN and Other DFT Techniques.
• Knowledge of power management industry/applications.
• I2C, I3C, SPI, USB, PMBUS.
• Scripting and automation languages like TCL, Python and C/C++. 

Location: 

Barcelona, Spain 

POSITION OVERVIEW

Monolithic Power Systems (MPS) is a global power management semiconductor company that is growing rapidly in the european market, thanks to our portfolio of incredible solutions built from our industry-leading, proprietary process technology. We are seeking for a intern at our new location at Ettenheim (D-77955), Germany. You will be instrumental in the expansion of our testing services and have the opportunity to collaborate with colleagues across our global locations (US, Europe, Asia).

JOB FUNCTIONS

As an intern for EMC and Analog Ciruit design you’ll work with different MPS and Customer products. You will support the local team by preparing and running Electromagnetic Testing and Electrical Tests acc. to international test standards. Some of your responsibilities will include, but will not be limited to:

• Support in the support of the measurement technology in the EMC and application laboratory 
• Assistance with the commissioning of the measuring technology and test stations
• Support in the commissioning and analysis of evaluation boards and analog circuits
• Assistance in and execution of research including documentation
• PCB layout of prototypes

REQUIREMENTS (Minimum) 

• Pursuing a Bachelors or Masters in Electrical Engineering, Computer Engineering, Electrical and Computer Engineering or related field 
• Basic understanding of schematics, layouts and digital components 
• Initial Experiences with analog circuitry (examples include: op-amps, DC/DC converter, motor driver, data converters, sensing, etc.)

QUALIFICATIONS (Preferred) 

• Initial experience in analog design and control theory
• Experience with PCB layout tools
• Basic understanding of electro-magnetic interference (EMI)
• Good verbal and written communication skills
• Ability to work in teams and collaborate effectively with people in different functions
• Good listener and good verbal and written communication skills

North America Channel Manager

• Overall knowledge of distribution and Rep sales processes
• At least 5 years’ experience working with semiconductor distributors
• Must have general technical understanding of power semiconductors, customers, applications.
• General understanding of DTAM regions, and organizations.
• Past history of success in driving a closed loop distribution process including:
• Training
• Customer / geographic TAM targets
• Driving distribution partners to engage with supplier
• Promotions
• Pricing, negotiations, inventory, ship / debits,
• QBR’s
• Must have both distribution and sales experience
• Previous direct reports / management preferred but not required
• Solid communication skills.
• Ability to travel to reps and distributors and drive marketing programs

Location:  San Jose, CA or Kirkland, WA preferred (Some flexibility for the right candidate)

Job Description

MPS is looking for a Digital Verification Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.   

In this position, you will develop the Digital Verification framework and infrastructure of complex digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. 

Responsibilities

• UVM and SystemVerilog based digital verification environment definition and development
• Verification IP (VIP) standardization, definition, development and documentation
• Integrate VIPs into the digital verification environment
• Development of test plans to fully verify all digital requirements in project specification
• Development of coverage metrics and testcases to fully cover all test plan items
• Digital verification scripting and automation
• Regression infrastructure definition, development and management
• Close interaction with Senior Digital and Analog Designers to develop VIP models and test cases
• Lead and supervise digital verification tasks of multiple projects
• Analyze and debug test results, code coverage and functional coverage
• Digital verification estimation, planning and scheduling to meet tape-out dates

Qualifications

• Requires BSEE/MSEE or Equivalent with emphasis in digital design/VLSI coursework
• 5+ years of experience in both RTL and gate-level verification on mixed-signal ICs
• Proficient in digital verification industry languages (UVM, SystemVerilog) and standards
• Proficient level in DV skills: constraint randomization, SV assertions, coverage metrics, analog and digital DV modeling, DV test plans, and regression analysis
• Skilled with scripting languages such as C shell, Bash, TCL, Python or Perl
• Strong knowledge in verification of low power and multiple power domain designs
• Experience with digital design, including RTL coding in SystemVerilog, digital synthesis, timing closure and power estimation
• Good written/verbal communication skills and strong teamwork/collaboration
• Self-motivated with attention to detail
• Strong analytical and problem-solving skills with ability to think outside the box
• Ability to work effectively in a dynamic environment
• Knowledge/Experience with the following is a plus:
• Embedded designs and/or firmware development
• Knowledge of functional safety requirements for automotive parts (ASIL)
• Experience with Formal Verification tools such as Synopsys VC Formal or Cadence JasperGold

Location

Chandler, AZ

Job Summary:

MPS is looking for an Application Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.

As a part of the team, you will be focused on developing cutting edge reference designs, testing the latest BMS ASIC, and generating collateral such as datasheets/application notes/ISO26262 documentation, as well as providing application customer support. This is a great opportunity where your success is only limited by your creativity.  

 Essential functions:

•  Provide onsite support of key customers design and testing.
• Work with design engineers, field applications team, and marketing to enhance and debug analog IC products.
• Develop application reference circuits.
• Write datasheets, application notes, design notes. 
• Provide application support for key customers and field application engineers

 Qualifications:

•  5+ years of hands-on experience with general analog blocks such as ADCs, DACs, operational amplifiers, LDOs, DCDC.
• Experience with BMS or high voltage applications is preferred
• Fluent communication skills in English
• Excellent writing and presentation skills
• MSEE or higher required

Location:

Arizona

Job Summary:

This person will join the growing MPS San Jose team, serving as the technical support contact for key MPS accounts in the Bay Area. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve tactical and strategic product positioning.

 Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Develop a solid technical understanding of our products and relevant solutions. 
• Provide deep technical support to customers to meet or improve upon customer’s requirements with MPS products
• Provide thorough customer design support including schematic and PCB layout review
• Identify and develop new business opportunities to grow MPS business.
• Gather potential market moves and competitors’ activities for MPS product strategy.

 Qualifications:

• BSEE/MSEE with 5+ years power management and analog systems experience.
• Hands on experience with point-of-load DC-DC power conversion.
• Experience with multiphase and/or ACDC preferred
• Ability to interface directly with customers and solve customer problems.
• Ability to work independently with strong analytical skills, self-motivated and excellent interpersonal skills. 
• Ability to communicate at all levels written and oral. 
• Oral /written proficiency in English. 
• Willing to drive to local customers and spend time in lab as needed.

 Location:

San Jose, CA

Job Summary:

This is a senior level position in application/system engineering. Responsibilities include defining and debugging IC products for server core power solutions, developing reference circuits, writing application/design notes, and providing application support for key customers.

 Essential functions:

•  Work with design engineers, field applications team, and marketing to enhance and debug analog IC products.
• Provide onsite support of key customers design-in and validation.
• Develop application reference circuits.
• Write datasheets, application notes, design notes.
• Provide application support for key customers and field application engineers

  Qualifications:

• 5+ years of hands-on experience in switch mode power supplies including DC/DC,.
• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in a power supply manufacturer or power management IC company desired
• MSEE or higher required

Project Coordinator, Facilities

The Project Coordinator supports the Project Manager in the planning and execution of corporate real estate projects and related building operations. Their primary duties include reviewing project invoices for accuracy, supporting the creation of purchase orders, assisting with vendor scheduling, organizing project related documents, arranging and participating in team meetings, taking and distributing meeting minutes, facilitating onsite walkthroughs, coordinating building maintenance requests, facilitating event management requests, etc.

Primary Responsibilities:

• Participate in project design/construction meetings, take meeting minutes and distribute to the project team.
• Assist with the evaluation of project drawings, schedules, submittals, and RFI’s to help identify & resolve potential project risks.
• Correspond with local authorities having jurisdiction to expedite any project permits or inspections.
• Assist with the review of vendor proposals and associated bid leveling exercises.
• Facilitate the creation of purchase orders, reviewing vendor invoices for accuracy, and submitting invoices for processing once approved by Project Manager.
• Assist with the evaluation of project change orders for budget, schedule and quality impacts.
• Assist the Project Manager in supervising the progress of current projects and help coordinate the efforts of all team members to keep workflow on track.
• Manage project-related paperwork by ensuring all necessary materials are current, properly filed and stored.
• Organize project correspondence, proposals, memos, approvals, etc.
• Communicate with project partners to ensure the identified project objectives are aligned amongst all individuals to promote clarity of objectives.
• Work closely with the Project Manager to ensure all budgets and schedules are updated and summarized for executive status reports.
• Documentation of internal processes related to managing real estate assets and activities.
• Planning and coordinating building equipment installations and refurbishments.
• Help manage Contractor/Consultant/Vendor relationships.
• Work with office administration staff for any project related notices with a building impact.
• Support executive team as necessary.
• Assist with “special” MPS projects.

Desired Skills:

• Good communication and interpersonal skills capable of maintaining professional long term relationships.
• Strong organizational and multi-tasking skills.
• Excellent analytical and problem solving abilities.
• Team-management and leadership skills.
• Document management and ability to use project management tools.
• Attention to details even under pressure.
• Time management skills with the ability to meet deadlines.
• Software Experience: BlueBeam Revu, Microsoft Project, Dropbox, etc.

Qualifications:

• Have a 4-year bachelor’s degree in construction management, architecture, business administration, accounting or similar educational background.
• Proven work experience as a Project Coordinator or similar role.
• Experience in project management, from conception to delivery.
• An ability to interpret project schedules, budgets and step-by-step action plans.
• Solid organizational skills, including multitasking and time-management.

Job Summary: 

Broadly experienced digital design/verification engineer of Mixed Signal ASICs 

A Digital Verification Engineer will be leading verification development infrastructure for complex digital FPGAs/ASICs including to create, maintain and drive verification plan/testcase development.

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• UVM and System Verilog based Digital Verification environment definition and development.
• VIPs standardization, definition, development and documentation.
• Define VIP’s integration into the Project’s Digital Verification environment.
• Digital Verification Metrics definition for RTL and Gate-Level Verification.
• Test Plan definition and development.
• Digital Verification Automation and Scripting.
• Regression’s infrastructure definition, development and management.
• Close interaction with Senior Digital and Analog Designers to develop testplan and/or VIP models.
• Lead and/or assist with digital verification Tasks of multiple projects.
• Review Digital Verification Metrics and Results of multiple projects.
• Define and design Digital Verification Top-Level Tests.
• Analyze and debug test results, code coverage and functional coverage. 
• Digital Verification estimation, planning and scheduling to meet tape-out dates.

Qualifications: 

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 5+ years of strong experience in both RTL and Gate-Level Verification.
• Proficient in Digital Verification Industry Languages (UVM, System Verilog) and Standards.

• Proficient Level in DV skills and areas: Constraint random tests, SV assertions, coverage metrics, analog and digital DV modelling, DV test plans, regression analysis and reports, UVM DV Agents (Monitor, Driver, Scoreboard), etc.  

• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Excellent scripting and automation skills using TCL, Python or C/C++.
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge/Experience with the following is a plus: 
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• Embedded designs and/or firmware development
• GITLab, SVN, or equiv version control

Location: 

San Jose, CA

Sr. Technical Marketing Engineer – DC-DC

Job Summary:

• This is a position with the technical marketing and application engineering team. Responsible for the definition and development of analog IC and module products for DC-DC power conversion solutions. Job duty includes competition analysis, simulation and bench verification for new product ideas, author product specifications, provide reference designs, evaluate new products, and write datasheets and application notes.

Essential Functions:

• Work with AEs, IC designers, packaging, and field team to define innovative products. 
• Work with customers on system designs with existing products or developing new products.
• Provide application support and technical training for key customers and field application engineers
• Write datasheets, application notes, design notes.

Qualifications:

• MSEE or higher;
• Hands on experience with power electronics hardware implementation and testing;
• Experience with schematic capture and PCB layout tools;
• Experience with EMI/EMC testing and debug is preferred;
• Excellent communication, writing, and presentation skills;

Education:

• MSEE or higher;

Location:

• San Jose, CA

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. The position requires both technical and leadership skills, while working closely with multi-disciplinary groups to drive & design key aspects of ASIC (power management/motor control/audio amplifier) feature set that meets the requirements of products.  Candidate will be expected to lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Support & develop the chip/digital level architecture and functional blocks
• Provide technical documentation with specifications, block diagrams, and requirements to stakeholders.
• Collaborate & work with departments/stakeholders including for architectures, requirements, and tradeoffs, including Digital/Analog Design, Application/Test Engineering, & Reliability/Operations to resolve design, application, or test issues.
• Develop system and chip level simulation verification techniques and methodology.

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 

• Digital Verification: Development test plans, test benches and automated test cases
• Knowledge and/or responsibility in synthesis, timing closure, and formal verification.
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 10+ years experience in design plus verification of ASIC or FPGA
• Broad & Strong knowledge of ASIC development process and digital design techniques.
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 

• Experience with the following is highly desired:
• Knowledge of power management architectures/applications, power conversion, motor control, audio amplifier 
• I2C, I3C, SPI, USB, PMBUS, I2S, CANOpen, EtherCAT
• GITLab 

Location:

Barcelona, Spain or Europe 

Job Description:

• ADC (Analog to Digital Converter)/AFE (Analog Front-End) IC market investigation and market strategy development
• Identify market opportunities and potential customers for future ADC/AFE products 
• Assist in new product definition and product roadmap development
• Promote current ADC/AFE products and market penetration 
• Product launch
• Competitive analysis 
• Pricing
• Product promotions: branding, datasheets, tools, web site, shows, training
• Field and customer interaction: providing product, application, and pricing guidance
• Identify and communicate technology gaps

 Qualifications:

. 

• 5+ years’ experience in Marketing / Applications, within an Analog IC Company, ADC/AFE market experience required
• Good understanding and knowledge of the ADC/AFE market and applications
• Excellent communication skills
• Understand product development process from idea to revenue
• BSEE Preferred

Job Description 职位描述：

Global Job Summary: Engineer’s responsibilities include defining and debugging Analog Digital Converter products, developing reference circuits, developing reference driver firmware, developing application software, writing datasheets and application/design notes, and providing application support and technical training. 

该职位的职责包括定义与调试ADC产品，设计参考电路、设计驱动代码、编写上位机实例程序、撰写产品规格书、应用设计手册并且给客户提供技术培训与支持。

1.Work with field applications team and collaborate with technical marketing to define and debug ADC products; 

与现场应用于市场团队合作，收集市场技术信息，定义与调试ADC产品

2.Evaluate new products and generate reports

评估新产品并撰写测试报告

3.Develop application reference circuits、driver firmware and application software

设计新产品的评估板、驱动及应用程序

4.Write datasheets, application notes, design notes

撰写产品规格书及应用手册

5.Develop and simulate circuits according to requirements, Provide application support and technical training for key customers

根据客户需求设计及仿真电路，提供技术支持与培训

任职要求：

1. Bachelor degree or above in electronics 、communication or related field of study;

本科学历及以上，电子或通信等相关专业

2.Solid knowledge of Analog Digital Converter, Operational amplifier、analog circuit, digital signal processing, Signal and system 

精通模拟数字转换器、运算放大器、模拟电路、数字信号处理、信号与系统等相关理论知识

3.Solid knowledge of ADC driver circuit, Ability to analyze  and develop complex analog circuit. Experience with related simulation software ,Ltspice Pspice.

精通ADC前端驱动电路的设计，复杂模拟电路设计分���能力，熟悉相关的电路仿真软件，如：Ltspice、Pspice等。

4.Experience with Matlab software, signal FFT analysis using Matlab software

精通MATLAB软件，能够使用MATLAB软件进行信号FFT分析等。

5.Knowledge of visual Studio and C# is a plus

具有Visual Studio软件开发者优先

6.Knowledge of visual Studio or related software is a plus

熟练使用Labview或相关仪器控制软件者优先

7.Familiar with communication protocols (i.e. I2C, SPI, UART, etc); developing driver of related interface using FPGA or MCU.

熟悉通信���议（如 I2C, SPI, UART等）,使用FPGA 或者MCU开发相关口的驱动。

Development Operations Engineer

Overview:

The IT DevOps Engineer, will join a dynamic and growing Global IT organization located in Kirkland, Washington with global support responsibilities particularly in Asia Pacific. Located in Kirkland, WA, the IT DevOps Engineer will be responsible to carry out automation and optimization tasks to better upkeep all IT Infrastructure systems and services both in-house and in cloud.

Job Responsibilities:

• Working with configuration tools in Linux - Terraform, Ansible to implement monitoring, alerting and reporting in the hybrid cloud infrastructure to upkeep and improve IT Infrastructure robustness and performance.  

• Constantly evaluate new IT Infrastructure automation and monitoring tools to help adopt the right ones to better manage the production services and meet the IT Infrastructure SLA requirements
• Maintain and improve code analysis, build, documentation, and release tools
• Closely work with IT System Engineers for Servers, Network, Storage and IT Security Engineers, to identify, plan, execute and manage IT Infrastructure Automation tasks well. 
• Integrate code analysis and quality metrics tools to provide unified and timely monitoring and alerts on IT Infrastructure performance to related IT staff. 
• Customize our continuous integration system to work with a growing team
• Improve integration between version control, build and incident tracking tools
• Collaborate with the team to improve overall build process reliability and scalability
• Upgrade, maintain current production deployment systems
• Provide ongoing support, needed documentation for the code development lifecycle
• Solve complex technical issues involving multiple technology stacks

Qualifications:

• Proficient with Git, continuous integration, and multiplatform development environments, strong knowledge of secure source control management
• Familiar with static analysis and code coverage tools
• Dedicated to optimizing full cycle engineering development pipelines

• 2+ years of Azure experience
• 5+ years of experience in developing and maintaining build tools and processes for engineering teams of 15 or more, preferably in IT Infrastructure automation and support environment.
• Experience with developing, operating, and maintaining critical workloads
• Experience with IT Infrastructure systems in Servers, Network and Storage systems and cloud technologies, cloud infrastructure and applications
• Experience with infrastructure-as-code methods and technologies
• Experience with compute including server, container, and serverless
• Experience with CI/CD and other automation
• Experience collaborating across multiple functions and teams

• Bachelor’s degree or above in Computer Science or related field

Location: Kirkland, WA/San Jose, CA

Corporate Counsel

Seeking corporate counsel to join small in-house legal team that values work-life balance at a publicly traded hardware technology company.

Primary Responsibilities: 

 GOVERNANCE AND COMPLIANCE

• Assist with corporate governance matters including board minutes, policies and training.  
• Assist with employment matters.
• Assist in preparing public company SEC filings and corporate secretary functions: timely and accurate 10-Ks, 10-Qs, proxy statements, etc. 
• Assist with any merger, acquisition or other corporate transactions.
• Support subsidiaries worldwide. 
• Provide strategic legal support to sales, finance, operations, engineering and other internal groups across the company. 
• Provide support to outside counsel on litigation matters.

COMMERCIAL CONTRACTS   

• Engage in contract negotiations with channel partners, suppliers and end customers. 
• Responsibility extends to support of international sales and territory-specific versions of sales and support contracts. 

Experience and Skill Requirements:

• Law degree with excellent academic credentials.
• Minimum of two years of corporate legal experience at a top tier law firm or in-house.   
• Candidate must be willing to roll up sleeves and be hands on with little or no administrative support.  Some tasks will be similar to paralegal duties. 
• Excellent oral and written communication skills, as well as excellent interpersonal skills desired. Candidate also needs to be able to handle challenging interpersonal or multi-cultural situations.  
• Be able to supervise and train junior legal staff.
• Must be a fast learner.
• Must be organized and able to work independently.
• Must be willing to travel occasionally 

Desired Experience:

• ’33 and’34 Act disclosure and reporting
• Drafting, reviewing and negotiating commercial and licensing contracts, including negotiating with sophisticated, nationally recognized companies
• Corporate governance matters, such as board minutes and subsidiary compliance
• Data privacy law (i.e. GDPR)

Location: Kirkland, WA

Product Marketing Manager (PMM)

Job Summary:

 MPS is seeking a self-motivated individual who will help to drive our new product execution, solution marketing, and business strategy for our high power/isolated products.  This individual will work closely with Field & Factory Application Engineers, sales teams, and customers, including Tier 1 and OEMs, who are primarily located in the Detroit, Michigan area. This role includes strategic involvement with product line roadmap planning, product definition, solution promotion and positioning to drive new business opportunities and design-in/design win activity management. It also includes performing market and competitive analysis, pricing strategy, opportunity projections, and forecasting.

Essential Functions:

• Customer interaction/visits
• Solution marketing 
• Driving and strategizing new business opportunities
• Work with sales and PL teams to close design-ins/wins
• Market/Competitive analysis
• Pricing
• Opportunity projection
• Forecasting
• Troubleshooting issues and problems
• Q & A from the field and customers

Qualifications:

• Background in isolated IC power products (isolated gate drivers, digital signal isolator, and isolated power),
• Background in IC solution selling for EVs/HEV Applications, including on-board chargers and DCDC converters
• HEV/EV Systems applications and automotive OEM/Tier 1 relationship experience is a plus
• Excellent verbal and written communication skills
• Ability to thrive in an extremely fast-paced, start-up environment.
• BSEE or equivalent required

Location:

Detroit, Michigan 

IT CRM Manager, MS Dynamics 

 Overview:

The IT CRM Manager is the technical leader for the MS Dynamics CRM, related CPQ/Pricing and related Enterprise Data Management systems/program. This role is to ensure that IT is properly aligned as an enabler of MPS’s continued rapid-growth while driving configuration over customization, efficient data/system integration, and strategically-planned progressive enhancements with Customer Advocacy/Care/Analytics and Security in mind.

 Major Responsibilities:

This position will report to Sr. Manager, IT Business Applications.

•  Partner with key business stakeholders in understanding business process and data needs and setting the overall direction and priorities of MPS Sales and Customer Advocacy requirements.
• Provide functional and technical leadership for MS Dynamics and related environments.
• Collaborate with key IT stakeholders to ensure overall CRM and related systems health.
• Lead CRM related projects through full-life-cycle.
• Work with other IT staff to integrate MS Dynamics with other key Applications.
• Identify continuous improvement opportunities and collaborate with others to define appropriate approach and deliver results.
• Ensure CRM related applications meet security and audit requirements.
• Leverage strong analytical and problem-solving skills to solve business problems.
• Manage the performance of direct reports by defining accountabilities, establishing performance objectives, providing feedback and guidance, and ensuring that all policies are understood and followed.
• Performs other duties as directed.

 Qualifications:

• Bsc in Computer Science or a related discipline.
• 5 to 10 years of in-depth application experience with MS Dynamics, and/or other CRM systems such as Salesforce Sales, Service Cloud
• Advanced Administrator, Consulting and/or Developer Certifications or commensurate experience required.
• Experience leading large scale successful CRM implementations and supports for global technology companies.
• Agile and/or Waterfall project management experience a must, certifications preferred.
• Expert in application/solution design, configuration / system setup and documentation.
• Strong management experience along with excellent verbal and written communication skills.
• Ability to thrive in a matrixed environment and adjust to changing priorities and participation in multiple projects.
• Deep experience with lead to opportunity business process, sales force automation, quotation management and workflow design.
• Data analytics and SQL skills required.
• Demonstrated ability to communicate with multiple levels of management and collaborate with a variety of individuals to achieve business results.
• Experience overseeing complex integrations preferred.

 Location:

• Kirkland, WA

Job Summary:

This position’s responsibilities include enhancing and debugging analog and digital IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for computing customers.

Essential functions:

• Work with design engineers, field applications team, and marketing to enhance and debug analog and digital IC products.
• Develop application reference circuits.
• Write datasheets, application notes, design notes. 
• Provide application support for key customers and field application engineers

Qualifications:

• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in computing system power design or power management IC company desired

Requirement:

• 2+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters.
• MSEE or higher required

Location:

Taiwan

MPS is seeking a highly self-motivated professional to work in our automotive product line. 

Essential Functions: 

• Develop reference design for automotive application with especially interest to cost, and EMC.

• Develop custom PCB using our solution for worldwide customer and evaluate its performance on EMC, efficiency and heat dissipation. 

• Define specification and support the development of new products for automotive product line 

• Test and qualify new parts according the requirement of the part. 

• Become EMC expert at Barcelona office, understand and perform all EMC measures. 

• Write technical articles, datasheet and application notes to support client and MPS’s sales team 

Qualifications: 

• BS in related engineering field (MS preferred) + 2-3 years of industry experience in automotive electronics 

• Solid understanding of power electronics circuits 

• Experience with PCB design (at least one year). 

• Good knowledge on EMC measures and test will be a plus. 

• Oral / written proficiency in English 

• Excellent communication, interpersonal and organizational skills 

Location: 

• Barcelona, Spain

Principal Applications Engineer

Job Summary:

• This is a senior level position in application/system engineering.
• Responsibilities include defining analog IC and module products, developing and debugging reference circuits internally and with strategic customers, writing datasheets and application/design notes, and providing application support and technical training.

Essential Functions:

• Work with design engineers, field applications team, and marketing to define analog IC products in DC/DC converters, specifically in cloud computing power solutions for CPU, GPU, ASIC, and SOC.
• Define and design 48V DC/DC module products, including isolated and non-isolated topologies.
• Work with customer and field application team to provide total computing power solution.
• Develop application reference circuits and system level power management solutions for Server and Cloud.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products.

Qualifications/ Requirements:

• 8+ years of hand-on experience in switch mode power supply designs especially in multi-phase core power design or isolated topology.
• Self-motivated and can-do attitude.
• Previous work experience in a plus.
• Fluent communication skills in English.
• Excellent writing and presentation skills.
• Prior experience in defining power management IC or power modules are highly preferred.

Education:

• MSEE or higher required

Location:

San Jose, CA

MPS is looking for a Senior Digital Design Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.

As a part of the team, you will be focused on digital design with the ability to collaborate on the product’s definition, testability, and end applications robustness.  This is a great opportunity where your success is only limited by your creativity.  

Responsibilities

• Leads block level digital circuit design and IP integration including, but not limited to, SPI, I2C, UART, DSP blocks, ADC’s and DAC’s, as well as custom state machines
• Proficient in digital synthesis, timing closure, and automated regression testcase development and report/tracking coverage metrics.
• Create scripting to support design and verification automation.
• Verify post silicon behavior with using scripting and automation languages.
• Collaborate with technical marketing engineers (TME) to prepare datasheets, EC Table specifications.
• Assists ATE (CP/FT) development with design-for-test methods
• Estimate and manage time/tasks completion to target schedule

Preferred Qualifications

• Requires BSEE/MSEE or Equivalent
• 5+ years’ experience within digital design plus verification
• Strong knowledge in low power design techniques and architectures
• Design experience with ARM architectures (Nice to Have, Not Required)
• Experience in Functional Safety (Nice to Have, Not Required)
• Self-motivated with attention to detail
• Strong analytical and problem-solving skills with ability to think outside the block
• Ability to work effectively in a dynamic environment

Location

Chandler, AZ

MPS is looking for a Senior Analog Design Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.

As a part of the team, you will be focused on block level analog design with the ability to collaborate on the product’s definition, testability, and end applications robustness.  This is a great opportunity where your success is only limited by your creativity.  

Responsibilities

• Lead block level analog circuit design and integration of strategic IP including, but not limited to, SAR and Sigma Delta ADC’s, precision bandgap references, and low power oscillators.
• Actively participates in the entire product development cycle, from product definition to product introduction
• Provide guidance to layout engineers on critical analog implementation aspects, monitors progress of layouts, and closes the loop with post layout extraction and simulation.
• Work with a team of engineers to evaluate intended product behavior pre tape-out and post tape-out.
• Collaborate with technical marketing engineers (TME) to prepare datasheets, EC Table specifications.
• Assists ATE (CP/FT) development with design-for-test method
• Estimate and manage time/tasks completion to target schedule

Preferred Qualification

• Requires BSEE/MSEE or Equivalent
• 5+ years’ experience with analog design 
• Strong knowledge of low power design techniques and architectures
• Experience in Functional Safety (Nice to Have, Not Required)
• Self-motivated with attention to detail
• Strong analytical and problem-solving skills with ability to think outside the block
• Ability to work effectively in a dynamic environment

Location

Chandler, AZ

Job Summary:

This position will provide technical support to the Sales and FAE team in developing potential opportunities in NB related products and services. The FAE need to lead team to identify business and arrange resource for customers’ technical service. This person also have to co-work with AE and PL for strategy plan and future business development.   

Essential Functions:

• Technical support on MPS NB computing related products. 
• Arrange and allocate technical resource among NB related customers to have better efficiency. .
• Conduct product presentation and training to distributor and customers
• Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues. 
• Deliver and communicate with Application Engineer and Product Marketing about customers' issues and information. 
• Provide the information including but not limited to market trends, competence analysis, and new product definition to Product Marketing Manager.

Qualifications:

• At least 5 years’ experience in NB related industry; experience on FAE manager will be a plus. 
• Familiar with Intel / AMD CPU core power and NV design, debug and test. 
• Experience on project management, following/ tracking etc. 
• Strong technical knowledge of NB power electronics.
• Ability of initiating and problem solving. 
• Good interpersonal and communication skills. 
• Adaptability- ability to meet changed condition. 
• Strong sense of responsibility, self-motivated and good team spirit.

Requirements:

• Strong knowledge in NB power design and experience is needed.
• Good English (both written and spoken).

Education:

• BS or MS majored in Electronic Engineering or related

Location:

• TAPEI, TAIWAN

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

Sr. / Design Engineer (AC/DC)

Responsibilities: 

As a Design Engineer you will be responsible for switching power supply development of integrated circuits using CMOS/Bipolar analog/digital circuitry Specific responsibilities are:

• Mixed-mode integrated circuit design for switching power supply:
• Layout supervision and verification.
• Preparation of test plan.
• Product characterization.
• Bench evaluation both at the silicon level and application level,
• Documentation.
• Behavioral modeling of analog and mixed-mode circuits
• Work with system engineer on new product definitions.  

Requirements:

• BSEE or foreign equivalent with 5 years of experience, or MSEE or foreign equivalent with 3 years of experience
• A minimum of 5 years of experience with emphasis on analog and/or digital Integrated Circuit ( IC ) design
• Hands-on experience with analog / digital IC design, preferred in high voltage AC/DC switching power supply.
• Familiarity of analog circuit blocks and device physics.
• Understanding of digital IC design.
• Excellent written and oral communications with experience in specification creation, technical report writing and test plans / instructions.
• Team player

Locations:

San Jose, CA, Kirkland, WA, Barcelona, Spain, OR Taipei, TW

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. Candidate is expected to be lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will also be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products includes: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 
• Ability to implement consistent and clear digital architecture across several products
• Digital Verification: Development test plans, test benches and automated test cases
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• 3+ years’ experience in ASIC/FPGA design and verification with PhDEE/BSEE/MSEE or equivalent
• Ability to work in local location without need for sponsorship
• Strong knowledge of ASIC development process and digital design techniques, with experience in low power design techniques/tradeoffs.
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 
• Experience with the following is desired:
• Experience with battery charger ICs including state machine design and requirements
• Embedded designs and/or firmware development
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• GITLab 

Location: USA (San Jose) or EU (Barcelona/Budapest)

 Job Summary:

This is a Manager level position in Technical Marketing/System Engineering. Responsibilities include managing teams to define and debug analog IC products, develop reference circuits, write datasheets/application/design notes, prepare promotional materials, and provide application support to key accounts/FAE.

Essential Functions:

• Managing key projects including server core/POL/eFuse. Work with Design Engineers, Field Applications team, and Marketing team to define and debug analog IC products for the specific product markets each team is focusing on. Lead the teams to continuously track the latest technologies in the market and penetrate the key customers by demonstrating MPS technology advantages. Prior experience in designing and defining multiphase VR is highly desired.
• Oversee the development of application reference circuits and system level power management solutions for Computing and Telecom applications.
• Provide application support and technical training for key customers and field application engineers

  Qualifications:

•  10+ years of hand-on experience in switch mode power supplies. Multi-phase experience is desired.
• MSEE or higher required
• Previous Management experience
• Fluent communication skills in English
• Excellent writing and presentation skills
• Self-motivated

Location:

San Jose, CA or Kirkland, WA

Job Summary:

• This is a senior level position in application/system engineering
• Responsibilities include defining and debugging analog IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support and technical training.

Essential functions:

• Work with design engineers, field applications team, and marketing to define analog IC products in DC/DC converters, controllers, and DrMOS applications, specifically in computing power solutions for CPU, GPU, ASIC, and SOC. 
  • Prior experience in designing and defining these products are highly desired
• Work with customer and field application team to provide total computing power solution

• Develop application reference circuits and system level power management solutions for computing power and server markets
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products
• Work with design engineer, product engineer, and test engineer on test items, characterization limits and data review
• Provide application support and technical training for key customers and field application engineers
• Oversee Junior Level engineers to perform road tests and customer supports

Qualifications:

• 8+ years of hand-on experience in switch mode power supply designs especially in multi-phase core power design.

• Fluent communication skills in English
• Excellent writing and presentation skills
• Self-motivated and can-do attitude
• Previous experience in a power supply manufacturer or power management IC company desired
• MSEE or higher required

Location:

• San Jose, CA or Kirkland, WA

Job Summary:

This is a senior level position in application/system engineering. Responsibilities include defining and debugging analog IC products, providing technical support for key customers, developing reference circuits, and writing datasheets and application/design notes.

Essential Functions:

• Provide application technical support and technical training for key customers and field application engineers.
• Work with design engineers, field applications team, and marketing to define and debug analog/digital IC products in DC/DC converters, Core power conversion, and DrMOS applications.
• Develop application reference circuits and system level power management solutions for computing, networking, server and cloud markets.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products. 

Qualifications:

• 8+ years of hand-on experience in switch mode power supplies including DC/DC, AC/DC or inverters.
• Previous experience with low voltage/high current multi-phase buck converter design/test/optimization for CPU/GPU power delivery applications is highly preferred.
• Fluent communication skills in English
• Excellent customer communication skills
• Excellent writing and presentation skills
• Self-motivated
• Previous experience in a power supply manufacturer or power management IC company is a plus
• MSEE or higher required

Location:

• San Jose, CA or Kirkland, WA

Job Summary: 

A Sr. DFT Engineer leads the end-to-end design, implementation, verification, validation and debugging of Digital and Mixed-Signal ICs DFT architectures and solutions utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Development and implementation of DFT Architectures and Techniques.
• RTL Design, debugging and Verification.
• Physical implementation, debugging and Gate-Level Verification.
• Generation of High-Quality Test and Debug Patterns.
• STA and Power Analysis of DFT Modes.
• Silicon bring-up, support, failure analysis, backtracking and diagnosis.  
• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis.
• LEC: constraints definition and debugging. Results and Reports analysis.
• ATPG Generation and Simulation.
• Analog, Digital and Mixed-Signal AMS Verification support.
• Close interaction with other Departments (Analog, Testing, Product, Digital).
• Analog and Digital Functional Testing.
• Test Plan Definition for Analog and Digital Structural and Functional Testing.

 Qualifications: 

• BSEE + 8 years of experience, MSEE + 5 years of experience as a DFT Engineer. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development process.
• Excellent RTL Verilog or System Verilog coding skills.
• Knowledge of standard Digital Verification languages (SystemVerilog/UVM) and Gate-Level Sims.
• Experience with Standard and Advanced DFT Techniques (ATPG, SCAN, IDDQ, Delay Fault, SCAN Compression/EDT, Reduced Pin Count SCAN, Boundary SCAN, LBIST, MBIST, ABIST, JTAG, etc.).
• Proficiency with ATE implementation, debugging and failure backtracking.
• Excellent understanding of Trade-Off between Test Quality and Test Time.
• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA.                
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 
• Automotive standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS, ARM and/or RISC-V designs
• Scripting and automation languages like TCL, Phyton and C/C++
• ASIC tool knowledge(Cadence, Synopsis) and DFT tool knowledge(Modus, Tetramax, Testsent Fastscan/TestKompress, TestInsight, etc)

Location:  Barcelona, Spain 

Field Sales Engineer (FSE) 

Primary functions: 

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently meeting or exceeding assigned revenue targets.
• Work closely with MPS product division marketing and engineering personnel to identify target applications/circuits to increase design wins and expand print at both new and existing customers.
• Develop and grow management level and design engineering relationships at strategic customers.  
• Identify new customer targets to engage and expand the MPS customer base.

Desired attributes:

• Self-motivated to work as an individual sales contributor in a field or home office.

• Technical ability to learn entire MPS product portfolio and the “go to market” strategy for each product line.
• Ability to engage strong sales personnel (including manufacturer representatives and channel partners)
• Strong interpersonal skills such as active listening, collaboration, problem-solving, conflict resolution, and adaptability.
• Ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.        

• Strong presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)

• Working knowledge of office tools such as Excel, Outlook, Power Point, Teams and ZOOM.
• Willingness and ability to develop conflict resolution skills between customer, sales (internal and representatives) and other MPS product and support divisions.

Requirements: 

• Technical degree (minimum bachelors), preferably in an Engineering discipline or a proven track record of success in selling electronic components for 3+ years. 
  • Will consider an experienced Field Applications Engineer or Design Engineer with the willingness to move to Sales and a strong desire to succeed.

Location: Detroit, MI

Field Application Engineer, Japan

Job Summary:

We are looking for a Field Application Engineer in Japan for a fast-growing Analog / Mixed-signal Integrated Circuit Company, Monolithic Power Systems, Inc. This FAE will work with Design Engineers and customers in developing power management IC’s and systems level solutions for digital consumer AV, digital imaging, PC peripherals, portable handheld, networking and automotive. This includes new product specification contributions, and customer application support in the field. This individual will support outside sales representatives at customer accounts within a geographic location. This position will also involve some travel within a specific region.  

Essential Functions:

• Provide technical support to Customers & Sales Channels Partners throughout territory.
• Ensure coordination of technical matters with the Factory in California and design center in

　   Hangzhou, Chengdu as needed.

• Manage Joint Development Programs with Customers.
• Discover new potential customer, application and opportunities with introducing right products
• Communicate with HQs, HZ and CD train district employees for new product(s) promotion

 　  activity

• Bring new product ideas for future business development

Qualifications:

• 5+ years of hands-on experience in analog power management electronics.
• Understand basic power circuit and power architecture
• Excellent communication / interpersonal skills. 
• Fluent communication skill (oral/written) in Japanese language. 
• Oral / written proficiency in the English language.
• Ability to travel up to 50% of the time.
• Self-starter, self-motivated.
• Bachelor’s degree is preferred

Desired Skills:

• Experience in design power electronics circuit (experience in DC/DC over 20A is mandatory, in AC/DC is preferable).
• Understanding of most common power supply architectures, and General PWM IC operation.
• The ability to develop strong relationships with our customers in your region. 
• The ability to evaluate electronic performance of EVB and customer boards on bench.
• Excellent communication/ interpersonal skills. 

Job Summary: 

 This is a senior level position in application/system engineering. Responsibilities include evaluating and defining power IC products, providing technical support for key customers, developing reference circuits and PCB layouts, preparing datasheets and application/design notes, and provide training to FAEs. 

Essential Functions: 

• Work with design engineers, field applications team, production, testing, and marketing to evaluate, debug and define DC-DC buck converters. 
• Provide application technical support and technical training for key customers and field application engineers.
• Develop application reference circuits and PCB layouts for computing, networking, telecom, server and cloud markets. 
• Prepare datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products.  

Qualifications:   

• 3+ years of hand-on experience in switch mode power supplies, including DC-DC buck converters. 
• New graduates with MSEE focused in power electronics will be considered. 
• Self-motivated and detail-oriented
• Excellent communication skills 
• Excellent writing and presentation skills 
• Familiar with various lab equipments
• Experience with softwares like MathCAD, ANSYS, Simplis and LTspice is a plus
• Previous experience in a power supply manufacturer or power management IC company desired 
• MSEE or higher required

MPS is seeking a highly self-motivated engineer with strong knowledge in power electronics. This person will work in supporting to introduce AC/DC and DC/DC converter solution in our potential customer, providing expertise knowledge and developing prototypes for specific applications. The engineer will collaborate with customers and design team and customers to propose novel solutions to expand current MPS portfolio. 

Essential Functions:

• Develop new architectures for high AC-DC and DC-DC power devices
• Simulate and evaluate requirements of new designs. Propose different solution focus on cost, efficiency or space. 
• Design schematic and PCB to deliver a fully testable solution.
• Validate, test and document new reference design and integrated circuits. Including transient, ripple and EMC measurements.
• Support marketing and sales on the development of Proof-of-concept and EVB for show our solutions.
• Write technical articles, datasheet and application notes.
• Support customer around Europe and US to introduce MPS solutions

Qualifications:

• BS in related engineering field (MS preferred) 
• Solid understanding and experience in power electronic and analog design. 
• Good knowledge in power electronics architectures (one phase or 3 phase), circuits and devices (Silicon carbide devices, Gan device)
• Experience of modeling and control of power converter
• Good knowledge on CAD software (Altium/Orcad preferred) and development of schematic and PCB layouts.
• Oral / written proficiency in English. 
• Excellent communication, interpersonal and organizational skills

Job Summary:  Work with key customers to create demand for MPS Products. 

Responsibilities:

• Build relationships with End Customers, distributors, FAE and Marketing team;
• Manage key customers business with flexible sales ability;
• Use influence to achieve sales goals and objectives;
• Travel a minimum of 25% of the time in related area.

Requirements:

• Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years' experience in sales/ marketing of Analog or Mix signal devices and/or integrated circuits;
• Must have good oral and written communications skills and excellent interpersonal skills;
• Should be self-starter, highly energetic, flexible, capable of making sound project decisions, and detail orientated;
• Solid ability to communicate in English.

Responsibilities:

• As a part of the team to work with distributors to support small and medium-sized customers and growing business continuously.
• Manage all business review processes with distributors and Ensure distributor communications are in line with distribution strategy.
• To get continuous in new opportunity from local distributors on resources for demand creation.
• To be interface between distributors and cross-functional teams, Assist in the management and development of the agent's targets.
• Implement distributor management process with measurement tools to achieve goals , Develop scorecard to monitor and measure initiatives and progress.

Requirements:

•  Bachelors in Electrical Engineering or Computer Science/Engineering, 3-5 years experience in semiconductor industry is required; 
•  Experiences in distribution business and technical background is plus;  
• Fluent in English.

Job Summary: Work with customers to create demand for MPS Products

Responsibilities:1. Build channel and connect to MPS customers;2. Manage and develop key accounts to achieve the sales goal and drive new design-ins and design-wins;3. Customer relationship building;4. Coordinate with distributors on sales forecast, customer demand and inventory control;5. Coordinate with FAE and Marketing team on new product promotion and new market penetration. Requirements:1. Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years experience in sales/ marketing of Analog or Mix signal IC;2. Experience with power management is preferred;3. Good communications skills and excellent interpersonal skills;4. Positive and aggressive attitude;5. Solid ability to communicate in English.

Overview：

This role will be responsible to manage, optimize, and improve MPS China online store performance and cooperation with other online distributors according to business requirements from various stakeholders. This position will also contribute to promotional campaigns, increasing the quantity and quality of traffic and leads to marketing database. Besides, you will be required to develop a detailed understanding of MPS business in the field of marketing automation tools and after events report analysis to dig out more valuable follow-ups for business.

Key Responsibilities:

• Plan and execute MPS ecommerce strategy and carry out digital properties to deliver a fine user experience, drive revenue potential and brand awareness.
• Take lead on ecommerce branding and promotional campaigns.
• Optimize ecommerce process, user experience and better serve customers online.
• Work with multiple online catalog distributors to drive ecommerce growth externally, including data analysis, new customer generation, demand creation, process optimization, and relation maintenance.
• Collaborate with MPS online supporting team to follow up with customer needs and dig out more potentials.
• Create and analyze weekly and monthly report for ecommerce, make recommendations to improve digital marketing effectiveness and impact.
• Act as a liaison between online technical supporting team and marketing team to design, ensure optimal operation performance.
• Assist to design, carry out other digital marketing campaigns by leveraging different marketing platforms internally and externally. Conduct in depth data analysis around audience segmentation, campaign optimization and demand creation. 

Requirements:

• Bachelor’s degree or above, major in ecommerce, marketing or communication related majors
• >3 years of working experience, ecommerce and online sales/demand generation experience strongly preferred.
• Strong skills in number analysis and problem solving.
• Excellent oral and written communication skills in both Chinese and English, ability to interact with various kinds of stakeholders in different countries and groups
• Highly self-driven, detail oriented, team player

Sr. Component Engineer/Manager

Job Summary

We are seeking to hire a creative and collaborative Sr. Component Engineer/Manager to join our team. Work with multi-functional teams for the power module and IC product planning, delivery, PCBA/SMT support and quality management. This role is essential to bring the products successful to the market.

Essential Functions

• Component and PCBA vendor management, quality control and regular audit;
• Passive components import and sourcing;
• Work with PCBA and package partners to generate the PCBA, Surface Mount (SMT) guidelines for MPS module and IC products;

Required Skills

• Experiences working directly with PCBA and component suppliers;
• Understand the component management, sourcing;
• Solid knowledge on PCBA, surface mount process for QFN, LGA and BGA packages;
• Knowledge on semiconductor or power module quality management and reliability test;

Qualifications

• BSEE/MSEE with 5+ years experiences of electronics industry PCBA, QA or component engineers;
• Power supply or power module industry experiences is a big plus;
• Good verbal and written skills

Locations

• Taipei, TW OR Chengdu, Shenzhen, Shanghai, China

Job Summary:

The candidate will be responsible for all aspects of physical design and implementation. 

Physical Design Engineer will be part of design development team. The candidate will work on the digital design implementation, and verification of mixed-signal ICs utilizing standard ASIC tools. Products to be designed/verified include, power management, and mixed signal functions. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Responsible for physical design, development, & verification of digital / mixed-signal IC’s

• Chip & block floorplan/implementation, power/clock distribution, chip assembly, P&R, STA, & LVS/DRC to closure
• Work closely with digital/analog design team for physical implementation 

Qualifications:

• Requires advance degree in Electrical Engineering/Computer Science or equivalent
• 1+ years (preferred) of Physical Digital Design experience.
• Good written/verbal communication English skills and strong team work/collaboration
• Ability to work independently, follow instructions according to design specifications, and executing tasks to hit milestones with quality

• Strong knowledge of ASIC development process and digital design techniques.

• Experience with programming, scripting and automation languages like Perl/TCL/Unix 
• Strong technical abilities & understanding in these areas:
• Verilog/SysVerilog coding.
• Synthesis, LEC, CTS, DFT, RC Extraction, and STA closure across multiple process corners.
• Physical Design Verification methodology to debug LVS/DRC issues at chip/block level
• Industry physical tools: Cadence (preferred) or Synopsys

Location:

HangZhou, China

Essential Functions 工作职责:

Qualifications 工作要求: