Li-Ion Charger, Protection Circuit, Tolerates Input Surge up to 30V, Small QFN2x2mm Package
The MP2674 is a high performance single cell Li-Ion/Li-Polymer battery charger protection circuit. By integrating high voltage input protection into the IC, the MP2674 can tolerate an input surge up to +30V. The device features input over voltage protection (OVP), battery over voltage protection (BOVP) and over charge current protection (OCP). The device also provides fault indications to the system when any of the protection events happens. For guaranteed safe operation, the MP2674 monitors its own internal temperature and turns off the MOSFET bridging VIN and OUT when the die temperature exceeds 150oC. The MP2674 is available in an 8-pin 2x2mm QFN package.
- Input Surge up to 30V
- Input Over voltage protection in 1?
- Proprietary Battery Over-Voltage Protection
- Programmable Charge Current Protection Limit Value
- Temperature Monitoring and Protection
- Fault Indication
- 2x2mm QFN Package
- EN ControlNo
- Charging MOSFET IntegratedNo
- Fault IndicationYes
- Number of Series Cells1
- PackageQFN-8 (2x2)
- Vbatt_ovp (V)4.37
- Iin (max) (A)1.5
- Operating Vin (min) (V)2.5
- Absolute Vin (max) (V)30
- Operating Vin (max) (V)5.6
- Iin_lmt (A)1.5
Battery Charger Protection Circuit Evaluation Board
The EV2674EG-00A is an evaluation board for the MP2674, the high-performance protection chip for single cell Li-Ion/Li-Polymer battery charger.
By integrating high voltage input protection into the charger IC, the MP2674 can tolerate an input surge up to 30V.
The MP2674 features input over voltage protection (OVP), battery voltage over voltage protection (BOVP), and over charge current protection (OCP). Additionally, MP2674 also monitors its own internal temperature and provides thermal protection (OTP). The device also provides fault indication. Any protection event can be indicated by customer.
￥ 178.75 + tax