USB PD控制器

USB PD控制器

MPS 提供功率高达 100W 的汽车级 USB PD 控制器。这些先进的PD控制器兼容 Type-C 2.0 和 USB PD3.0 规范且涵盖多种通用协议,例如USB DCP、QC3.0和BC1.2华为FCP;同时还支持 BC1.2 CDP。采用这些器件,汽车客户可设计灵活高效的 USB PD 端口,以供整车使用。

高度灵活:兼容多种协议
卓越性能:出色效率与可靠性
高功率:可达100W
AEC-Q100 Qualified
Automotive application ready

High Power Efficiency
Excellent thermal performance

Leading Power Density
Reduces space requirements

参数显示栏
状态
MPS库存
最小输入电压(V)
最大输入电压(V)
最大输出电流(A)
典型静态电流(mA)
共同特性
特性
封装
等级
调节输出
最小输出电压(V)
最大输出电压(V)
MPSafe
MPL
Product URL
最小输入电压(V)
最大输入电压(V)
最大输出电流(A)
典型静态电流(mA)
共同特性
特性
封装
等级
调节输出
最小输出电压(V)
最大输出电压(V)
MPS
Enable (EN) Off Timer Up to 120 Minutes
High-Voltage CCx/DP/DM I/O and Short-to-Battery VBUS/GND Protection
Integrated VCONN Power Switch
Integrated VCONN Power Switch and OCP
Supports DCP Schemes for BC1.2, 3A Divider, and 1.2V/1.2V Mode
Supports One USB Type-C DFP with USB PD3.0 and PPS
Supports QC3.0 and Huawei FCP
Supports USB PD Alternate Mode for Display Port
Thermal Shutdown Protection
USB PD Controller
Under-Voltage Protection (UVP)
VBUS Isolation N-Channel MOSFET Driver
VBUS OVP and UVP
过温关断保护
2 NTC Thermal Protection Pins
7 GPIO Outputs Support Multiple Functions
Compliant with USB PD 3.1 with PPS, USB Type-C 2.1, TCPC 2.0 Supporting Firmware Update
Configurable PD Power Management when NTC, Power Sharing, or Battery Low Is Tripped
Dynamic Power-Sharing/Vbatt Low/Over-Temperature PDP Mitigation
High-Voltage CCx/DP/DM I/O and Short-to-Battery/VBUS/GND Protection
High-Voltage I/O Pins: VBUS, CCx, DP, and DM
High-Voltage Pins for CC1, CC2, DP, and DM
I2C Initiator/Target Interface and Interrupt
I2C/UART/Serial Wire Debugging
Integrated High-Voltage VCONN Supply Power Switch
Integrated VCONN Switch and OCP
Legacy Charging Protocol Supports BC 1.2, Apple 3A Divider Mode, and Huawei FCP/SCP
MCU-Based USB PD Controller Supports Apple Divider 3 Mode, BC1.2, Qualcomm Quick Charge 3/4/4+ Technology
Passed USB PD 3.1 Certification Test with PPS (TID: 8467)
Supports Configurable Battery Low Detection Threshold and Blanking Time
Supports I2C Master
Supports QC 2.0/3.0, BC1.2 Short Mode, Apple Charging, and Huawei FCP
Supports USB 2.0, BC1.2, CDP and DCP Mode
Supports USB Type-C and PD 3.0 PPS
Two I2C Initiator/Target Interfaces
UART and Serial Wire Debug (SWD)
VBUS Power Path Isolation N-Channel MOSFET Driver
QFN-20 (4x4)
QFN-24 (4x4)
车规级
Is MPSafe Has MPL Product URL
     
MPF52000-AEC2

用于源端口的双端口USB PD 控制器,支持固件更新和高级 PDP 管理,符合 AEC-Q100 认证

从MPS官网购买 4.6 5.5 0.15
Integrated VCONN Power Switch, 过温关断保护, USB PD Controller, VBUS OVP and UVP
Dynamic Power-Sharing/Vbatt Low/Over-Temperature PDP Mitigation, High-Voltage CCx/DP/DM I/O and Short-to-Battery/VBUS/GND Protection, I2C/UART/Serial Wire Debugging, MCU-Based USB PD Controller Supports Apple Divider 3 Mode, BC1.2, Qualcomm Quick Charge 3/4/4 Technology
QFN-24 (4x4) 车规级 2 3.3 48 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/mpf52000-aec2.html
MPF52001-AEC2

用于源端口的单端口USB PD 控制器,支持固件更新和高级 PDP 管理,符合 AEC-Q200 认证

从MPS官网购买 4.6 5.5 5 0.3
High-Voltage CCx/DP/DM I/O and Short-to-Battery VBUS/GND Protection, Integrated VCONN Power Switch and OCP, Supports USB PD Alternate Mode for Display Port, Thermal Shutdown Protection, Under-Voltage Protection (UVP)
Compliant with USB PD 3.1 with PPS, USB Type-C 2.1, TCPC 2.0 Supporting Firmware Update, Legacy Charging Protocol Supports BC 1.2, Apple 3A Divider Mode, and Huawei FCP/SCP, Passed USB PD 3.1 Certification Test with PPS (TID: 8467), Two I2C Initiator/Target Interfaces, UART and Serial Wire Debug (SWD)
QFN-24 (4x4) 车规级 1 0 https://www.monolithicpower.cn/cn/mpf52001-aec2.html
MPQ5038-AEC1

USB PD 源控制器,具有 7 个可配置 PDO 和降负荷功能,符合 AEC-Q100 认证

从MPS官网购买 3.3 21 0.1
Enable (EN) Off Timer Up to 120 Minutes, Supports DCP Schemes for BC1.2, 3A Divider, and 1.2V/1.2V Mode, Supports One USB Type-C DFP with USB PD3.0 and PPS, Supports QC3.0 and Huawei FCP, VBUS Isolation N-Channel MOSFET Driver
Configurable PD Power Management when NTC, Power Sharing, or Battery Low Is Tripped, High-Voltage Pins for CC1, CC2, DP, and DM, I2C Initiator/Target Interface and Interrupt, Integrated High-Voltage VCONN Supply Power Switch, Supports Configurable Battery Low Detection Threshold and Blanking Time
QFN-20 (4x4) 车规级 4.6 5.5 1 0 https://www.monolithicpower.cn/cn/mpq5038-aec1.html
MPQ5031-AEC1

仅用于充电的单端口 USB PD 控制器,符合 AEC-Q100 认证

4.6 5.5 5 0.1 USB PD Controller
2 NTC Thermal Protection Pins, 7 GPIO Outputs Support Multiple Functions, High-Voltage I/O Pins: VBUS, CCx, DP, and DM, Integrated VCONN Switch and OCP, Supports I2C Master, Supports QC 2.0/3.0, BC1.2 Short Mode, Apple Charging, and Huawei FCP, Supports USB 2.0, BC1.2, CDP and DCP Mode, Supports USB Type-C and PD 3.0 PPS, VBUS Power Path Isolation N-Channel MOSFET Driver
QFN-20 (4x4) 车规级 1 3.3 21 1 0 https://www.monolithicpower.cn/cn/mpq5031-aec1.html
无更多产品显示