USB PD功率级

USB PD功率级

MPS 提供全系列 USB PD 功率级解决方案,可满足 27W 至 100W 的功率传输需求。客户可根据应用需求在多种变换器、PD控制器和一体化PD解决方案中进行选择。这些先进的 PD 产品均可兼容最新标准,并涵盖多种通用协议,能够帮助汽车客户设计紧凑且高效的 USB PD 端口,以供整车使用。

易于使用:多种PD选择
卓越性能:出色效率与可靠性
高功率:可达100W
AEC-Q100 Qualified
Automotive application ready

High Power Efficiency
Excellent thermal performance

Leading Power Density
Reduces space requirements

参数显示栏
状态
MPS库存
最小输入电压(V)
最大输入电压(V)
最大输出电流(A)
典型静态电流(mA)
最大开关频率(kHz)
反馈电压 (V)
共同特性
特性
控制模式
封装
等级
调节输出
最小输出电压(V)
最大输出电压(V)
典型开关电流限(A)
最大占空比(%)
MPSafe
MPL
Product URL
最小输入电压(V)
最大输入电压(V)
最大输出电流(A)
典型静态电流(mA)
最大开关频率(kHz)
反馈电压 (V)
共同特性
特性
控制模式
封装
等级
调节输出
最小输出电压(V)
最大输出电压(V)
典型开关电流限(A)
最大占空比(%)
MPS
Accurate Output Current (IOUT) Monitor
Configurable Valley Current Limit via ILIM
Constant Current (CC) Limiting
Dynamic Output Transition (VSELx) with Slew Rate Control
Enable (EN) Off Timer Up to 120 Minutes
Enable (EN) Shutdown Passive Discharge
I2C, Alert, and One-Time Programmable (OTP) Memory
I2C-Configurable Reference Voltage
Input OVP
Low-Dropout (LDO) Mode
Output OCP
Output OCP/SCP, Output OVP, and OTP
Output OVP
Output OVP, UVP, OCP, and OTP
Output Passive Discharge Function
Output and Input Over-Voltage Protection (OVP)
Power Good (PG) Indicator
Power Good (PG) and Fault Indication
Selectable Input or Output CC Limit with 5% Accuracy via Factory Trimming
Supports DCP Schemes for BC1.2, 3A Divider, and 1.2V/1.2V Mode
Supports Line Drop Compensation
Supports One USB Type-C DFP with USB PD3.0 and PPS
Supports QC3.0 and Huawei FCP
Telemetry Readback Includes VIN, VOUT, IOUT, and Faults
USB PD Controller
VBUS Isolation N-Channel MOSFET Driver
Wettable Flank QFN Option
内部软启动
电源正常输出指示
过压保护
过温关断保护
2 NTC Thermal Protection Pins
2.5% Accuracy Current Monitor (IMON)
7 GPIO Outputs Support Multiple Functions
97.5% Peak Efficiency
Above 0.6mm Distance between VIN and GND
Accurate Output Current Monitor
Biased VDRV via External Power Supply to Improve Efficiency
COT Control for Fast Load Transient Response
Can be Paralleled with Up to 4 Phases
Configurable I2C Slave Address
Configurable I2C Slave Address Supported by the ADDR Pin and I2C Register
Configurable Input UVLO
Configurable PD Power Management when NTC, Power Sharing, or Battery Low Is Tripped
Constant Current Limit Disable Bit
Cyclic Redundancy Check (CRC) for MTP Integrity
EN Shutdown Passive Discharge
EN Shutdown and Passive Discharge
FSS for Low EMI
Ground Short to Battery Protection
High-Voltage I/O Pins: VBUS, CCx, DP, and DM
High-Voltage Pins for CC1, CC2, DP, and DM
I2C Initiator/Target Interface and Interrupt
I2C 接口
I2C, Alert, and OTP Memory
Integrated 5V/60mA LDO Regulator to Supply External MCU
Integrated High-Voltage VCONN Supply Power Switch
Integrated LS-FETs
Integrated VCONN Switch and OCP
Lossless Low-Side RDS(ON) or Shunt Current-Sensing
Meets USB PD 3.0 with PPS Specification
N-Channel MOSFET 10V Gate Driver with 4.2A Source and 5.2A Sink Capability
OVP/OCP/SCP
Selectable Auto PFM/PWM Mode and Forced PWM Mode
Selectable Automatic PFM or PWM Mode and Forced PWM Mode
Selectable Forced PWM or Auto-PFM/PWM Mode
Selectable Frequency
Selectable Input or Output CC Limit with 5% Accuracy via Factory Trimming
Selectable PSM/FCCM via MODE Pin
Supports Configurable Battery Low Detection Threshold and Blanking Time
Supports High-Side Current Sense
Supports I2C Master
Supports PD EPR 240W and AVS
Supports QC 2.0/3.0, BC1.2 Short Mode, Apple Charging, and Huawei FCP
Supports USB 2.0, BC1.2, CDP and DCP Mode
Supports USB Type-C and PD 3.0 PPS
Up to 98.14% Peak Efficiency
VBUS Power Path Isolation N-Channel MOSFET Driver
线损补偿
输出电流限
过温关断
频谱扩展
COT
电流控制模式
QFN-19 (4x5)
QFN-20 (3x5)
QFN-20 (4x4)
QFN-20 (4x5)
QFN-23 (4x4)
车规级
Is MPSafe Has MPL Product URL
     
MPQ4233-AEC1
具有36V 耐受电压并带4个集成 MOSFET 和 I2C接口的3A升降压变换器,符合 AEC-Q100 认证
4.3 22 3 0.7, 0.13 1200 0.33, 0.5, 2 Input OVP, Output OCP, Output OVP, 过温关断保护
Above 0.6mm Distance between VIN and GND, Configurable I2C Slave Address, EN Shutdown Passive Discharge, I2C, Alert, and OTP Memory, 线损补偿, Selectable Auto PFM/PWM Mode and Forced PWM Mode
电流控制模式 QFN-19 (4x5) 车规级 1 1 22 12, 9 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/mpq4233-aec1.html
MPQ4232A-AEC1
带4个集成 MOSFET 和 I²C 接口的36V、6A 升降压变换器,符合 AEC-Q100 认证
3 36 6 0.9, 0.13 1000 0.33, 0.5, 2
Constant Current (CC) Limiting, Output and Input Over-Voltage Protection (OVP), 过温关断保护
Configurable I2C Slave Address Supported by the ADDR Pin and I2C Register, EN Shutdown and Passive Discharge, I2C, Alert, and OTP Memory, 线损补偿, Selectable Forced PWM or Auto-PFM/PWM Mode
电流控制模式 QFN-19 (4x5) 车规级 1 1 24 13.2, 9 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/mpq4232a-aec1.html
MPQ4233A-AEC1
36V、3A、升降压变换器,带四个集成 MOSFET 和 I²C接口并符合 AEC-Q100 认证
3 36 3 0.9, 0.13 1000 0.33, 0.5, 2
Accurate Output Current (IOUT) Monitor, Enable (EN) Shutdown Passive Discharge, I2C-Configurable Reference Voltage, I2C, Alert, and One-Time Programmable (OTP) Memory, Selectable Input or Output CC Limit with 5% Accuracy via Factory Trimming
Configurable I2C Slave Address Supported by the ADDR Pin and I2C Register, Integrated 5V/60mA LDO Regulator to Supply External MCU, 线损补偿, Selectable Automatic PFM or PWM Mode and Forced PWM Mode, Up to 98.14% Peak Efficiency
电流控制模式 QFN-19 (4x5) 车规级 1 1 24 9, 13.2 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/mpq4233a-aec1.html
MPQ9934-AEC1

80V 入、30A、同步降控制器,具有动态电压调节功能符合 AEC-Q100 认证

7 80 30 0.4 1000 0.17 to 1.6
Configurable Valley Current Limit via ILIM, Dynamic Output Transition (VSELx) with Slew Rate Control, Output OCP/SCP, Output OVP, and OTP, Output Passive Discharge Function, Power Good (PG) Indicator, Supports Line Drop Compensation
Biased VDRV via External Power Supply to Improve Efficiency, COT Control for Fast Load Transient Response, Lossless Low-Side RDS(ON) or Shunt Current-Sensing, N-Channel MOSFET 10V Gate Driver with 4.2A Source and 5.2A Sink Capability, Selectable PSM/FCCM via MODE Pin
COT QFN-23 (4x4) 车规级 1 0.5 80 99 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/mpq9934-aec1.html
MPQ8880A-AEC1

60V、4.5A、高效率、数字、可配置、同步降压变换器,带PMBus接口且符合 AEC- Q100认证

购买 4 60 4.5 0.093, 0.008 2200 0 to 1.5345
Low-Dropout (LDO) Mode, Output OVP, UVP, OCP, and OTP, Power Good (PG) and Fault Indication, Telemetry Readback Includes VIN, VOUT, IOUT, and Faults
97.5% Peak Efficiency, Can be Paralleled with Up to 4 Phases, Cyclic Redundancy Check (CRC) for MTP Integrity, FSS for Low EMI, Supports PD EPR 240W and AVS
电流控制模式 QFN-20 (4x5) 车规级 1 0.6 48 9 (Peak), 6.5 (Valley) 98 1 0 https://www.monolithicpower.cn/cn/mpq8880a.html
MPQ5038-AEC1

USB PD 源控制器,具有 7 个可配置 PDO 和降负荷功能,符合 AEC-Q100 认证

购买 3.3 21 0.1
Enable (EN) Off Timer Up to 120 Minutes, Supports DCP Schemes for BC1.2, 3A Divider, and 1.2V/1.2V Mode, Supports One USB Type-C DFP with USB PD3.0 and PPS, Supports QC3.0 and Huawei FCP, VBUS Isolation N-Channel MOSFET Driver
Configurable PD Power Management when NTC, Power Sharing, or Battery Low Is Tripped, High-Voltage Pins for CC1, CC2, DP, and DM, I2C Initiator/Target Interface and Interrupt, Integrated High-Voltage VCONN Supply Power Switch, Supports Configurable Battery Low Detection Threshold and Blanking Time
QFN-20 (4x4) 车规级 4.6 5.5 1 0 https://www.monolithicpower.cn/cn/mpq5038-aec1.html
MPQ5031-AEC1

仅用于充电的单端口 USB PD 控制器,符合 AEC-Q100 认证

4.6 5.5 5 0.1 USB PD Controller
2 NTC Thermal Protection Pins, 7 GPIO Outputs Support Multiple Functions, High-Voltage I/O Pins: VBUS, CCx, DP, and DM, Integrated VCONN Switch and OCP, Supports I2C Master, Supports QC 2.0/3.0, BC1.2 Short Mode, Apple Charging, and Huawei FCP, Supports USB 2.0, BC1.2, CDP and DCP Mode, Supports USB Type-C and PD 3.0 PPS, VBUS Power Path Isolation N-Channel MOSFET Driver
QFN-20 (4x4) 车规级 1 3.3 21 1 0 https://www.monolithicpower.cn/cn/mpq5031-aec1.html
MPQ4262-AEC1

集成下管 MOSFET 和 I2C接口的汽车级36V、100W 升降压变换器,符合 AEC-Q100 认证

购买 3.6 36 5 0.13 580 0.5 内部软启动, 电源正常输出指示
EN Shutdown and Passive Discharge, Ground Short to Battery Protection, I2C 接口, I2C, Alert, and OTP Memory, Integrated LS-FETs, Meets USB PD 3.0 with PPS Specification, 输出电流限, OVP/OCP/SCP, Selectable Forced PWM or Auto-PFM/PWM Mode, 过温关断
电流控制模式 QFN-20 (3x5) 车规级 1 1 36 15 95 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/step-down-step-up-converters/mpq4262-aec1.html
MPQ4263-AEC1

36V、140W 升降压 (Buck-Boost) 变换器,集成下管 MOSFET、高端电流采样和I²C接口,符合  AEC-Q100 认证

购买 3.6 36 7 0.13 580 0.5 Output OCP, 过压保护, 过温关断保护
2.5% Accuracy Current Monitor (IMON), Configurable Input UVLO, Constant Current Limit Disable Bit, Supports High-Side Current Sense
电流控制模式 QFN-20 (3x5) 车规级 1 1 36 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/step-down-step-up-converters/mpq4263-aec1.html
MPQ4232-AEC1

集成4个MOSFET 和数字接口的 5A 升降压变换器,符合 AEC-Q100 等级1 认证

购买 4.3 22 6 0.9, 0.13 1000 0.33, 0.5, 2 电源正常输出指示, 过温关断保护, Wettable Flank QFN Option
Accurate Output Current Monitor, EN Shutdown Passive Discharge, 频谱扩展, 线损补偿, Selectable Auto PFM/PWM Mode and Forced PWM Mode, Selectable Frequency, Selectable Input or Output CC Limit with 5% Accuracy via Factory Trimming
电流控制模式 QFN-19 (4x5) 车规级 1 1 22 9, 13.2, 17.9, 22.4 1 0 https://www.monolithicpower.cn/cn/products/automotive-aecq-grade/usb-charging-and-wireless-charging/step-down-step-up-converters/mpq4232-aec1.html
无更多产品显示