2.7 - 15V, 0.7 - 5A, Current Limit Switch with Over-Voltage Clamp and Reverse Blocking



The MP5016 is a protection device designed to protect circuitry on the output from transients on the input. The MP5016 also protects the input from undesired shorts and transients coming from the output. During start-up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting and MODE pin setting. The maximum load at the output is current-limited. The magnitude of the current limit is controlled by an external resistor from ILIMIT to GND. There is a fixed 2.5A current limit when ILIMIT is floating. The output voltage is limited by the output over-voltage protection (OVP) function. The clamp voltage can be set by the MODE connection. The MP5016 offers a GATE drive signal connected to an external N-channel MOSFET gate to block current flowing from the output to the input when the IC is in enable off, power shutdown, or thermal shutdown. The MP5016 is available in a QFN-10 (1.5mmx2mm) package.


  • Wide 2.7V to 15V Operating Input Range
  • 26V Absolute Maximum Transient Input Voltage
  • Selectable Over-Voltage Clamp Threshold
  • Fast Output Over-Voltage Protection (OVP) Response
  • Integrated 43mO Power MOSFET
  • Adjustable Current Limit or Fixed Current Limit when Floating ILIMIT
  • Reverse-Blocking MOSFET Driver
  • Soft-Start Time Programmable through DV/DT and MODE
  • Fast Response for Hard Short Protection
  • Over-Current Protection (OCP) Hiccup Protection
  • Thermal Shutdown and Auto-Retry
  • Available in a QFN-10 (1.5mmx2mm) Package


  • EnableActive High
  • Fault FlagThermal Shutdown
  • Ilimit (A)Prog.
  • Slew Rate ControlYes
  • Special FeaturesReverse-Current Blocking
  • Rds(on) (mΩ)43
  • GradeCatalog
  • PackageQFN-10 (1.5x2)
  • Channels1
  • Iq (typ) (µA)50
  • Iout (max) (A)5
  • Vin (max) (V)15
  • 最小输入电压2.7


所有 MPS 产品都保证无铅,无卤素,并且遵守 RoHS 规范。详情请见“环境认证”。